diff --git a/project/pca10040/s132/config/sdk_config.h b/project/pca10040/s132/config/sdk_config.h index 253d59f5e54f404ec93081a907a8ca561b1094df..80de845ed90ace34d0335b24060192935a6c4a7c 100644 --- a/project/pca10040/s132/config/sdk_config.h +++ b/project/pca10040/s132/config/sdk_config.h @@ -48,4831 +48,6 @@ #endif // <h> Board Support - -//========================================================== -// <e> NRF_MPU_LIB_ENABLED - nrf_mpu_lib - Module for MPU -//========================================================== -#ifndef NRF_MPU_LIB_ENABLED -#define NRF_MPU_LIB_ENABLED 0 -#endif -// <q> NRF_MPU_LIB_CLI_CMDS - Enable CLI commands specific to the module. - - -#ifndef NRF_MPU_LIB_CLI_CMDS -#define NRF_MPU_LIB_CLI_CMDS 0 -#endif - -// </e> - -// <e> NRF_STACK_GUARD_ENABLED - nrf_stack_guard - Stack guard -//========================================================== -#ifndef NRF_STACK_GUARD_ENABLED -#define NRF_STACK_GUARD_ENABLED 0 -#endif -// <o> NRF_STACK_GUARD_CONFIG_SIZE - Size of the stack guard. - -// <5=> 32 bytes -// <6=> 64 bytes -// <7=> 128 bytes -// <8=> 256 bytes -// <9=> 512 bytes -// <10=> 1024 bytes -// <11=> 2048 bytes -// <12=> 4096 bytes - -#ifndef NRF_STACK_GUARD_CONFIG_SIZE -#define NRF_STACK_GUARD_CONFIG_SIZE 7 -#endif - -// </e> - -// </h> -//========================================================== - -// <h> nRF_Crypto - -//========================================================== -// <e> NRF_CRYPTO_ENABLED - nrf_crypto - Cryptography library. -//========================================================== -#ifndef NRF_CRYPTO_ENABLED -#define NRF_CRYPTO_ENABLED 1 -#endif -// <o> NRF_CRYPTO_ALLOCATOR - Memory allocator - - -// <i> Choose memory allocator used by nrf_crypto. Default is alloca if possible or nrf_malloc otherwise. If 'User macros' are selected, the user has to create 'nrf_crypto_allocator.h' file that contains NRF_CRYPTO_ALLOC, NRF_CRYPTO_FREE, and NRF_CRYPTO_ALLOC_ON_STACK. -// <0=> Default -// <1=> User macros -// <2=> On stack (alloca) -// <3=> C dynamic memory (malloc) -// <4=> SDK Memory Manager (nrf_malloc) - -#ifndef NRF_CRYPTO_ALLOCATOR -#define NRF_CRYPTO_ALLOCATOR 0 -#endif - -// <e> NRF_CRYPTO_BACKEND_CC310_BL_ENABLED - Enable the ARM Cryptocell CC310 reduced backend. - -// <i> The CC310 hardware-accelerated cryptography backend with reduced functionality and footprint (only available on nRF52840). -//========================================================== -#ifndef NRF_CRYPTO_BACKEND_CC310_BL_ENABLED -#define NRF_CRYPTO_BACKEND_CC310_BL_ENABLED 0 -#endif -// <q> NRF_CRYPTO_BACKEND_CC310_BL_ECC_SECP224R1_ENABLED - Enable the secp224r1 elliptic curve support using CC310_BL. - - -#ifndef NRF_CRYPTO_BACKEND_CC310_BL_ECC_SECP224R1_ENABLED -#define NRF_CRYPTO_BACKEND_CC310_BL_ECC_SECP224R1_ENABLED 0 -#endif - -// <q> NRF_CRYPTO_BACKEND_CC310_BL_ECC_SECP256R1_ENABLED - Enable the secp256r1 elliptic curve support using CC310_BL. - - -#ifndef NRF_CRYPTO_BACKEND_CC310_BL_ECC_SECP256R1_ENABLED -#define NRF_CRYPTO_BACKEND_CC310_BL_ECC_SECP256R1_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_CC310_BL_HASH_SHA256_ENABLED - CC310_BL SHA-256 hash functionality. - - -// <i> CC310_BL backend implementation for hardware-accelerated SHA-256. - -#ifndef NRF_CRYPTO_BACKEND_CC310_BL_HASH_SHA256_ENABLED -#define NRF_CRYPTO_BACKEND_CC310_BL_HASH_SHA256_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_CC310_BL_HASH_AUTOMATIC_RAM_BUFFER_ENABLED - nrf_cc310_bl buffers to RAM before running hash operation - - -// <i> Enabling this makes hashing of addresses in FLASH range possible. Size of buffer allocated for hashing is set by NRF_CRYPTO_BACKEND_CC310_BL_HASH_AUTOMATIC_RAM_BUFFER_SIZE - -#ifndef NRF_CRYPTO_BACKEND_CC310_BL_HASH_AUTOMATIC_RAM_BUFFER_ENABLED -#define NRF_CRYPTO_BACKEND_CC310_BL_HASH_AUTOMATIC_RAM_BUFFER_ENABLED 0 -#endif - -// <o> NRF_CRYPTO_BACKEND_CC310_BL_HASH_AUTOMATIC_RAM_BUFFER_SIZE - nrf_cc310_bl hash outputs digests in little endian -// <i> Makes the nrf_cc310_bl hash functions output digests in little endian format. Only for use in nRF SDK DFU! - -#ifndef NRF_CRYPTO_BACKEND_CC310_BL_HASH_AUTOMATIC_RAM_BUFFER_SIZE -#define NRF_CRYPTO_BACKEND_CC310_BL_HASH_AUTOMATIC_RAM_BUFFER_SIZE 4096 -#endif - -// <q> NRF_CRYPTO_BACKEND_CC310_BL_INTERRUPTS_ENABLED - Enable Interrupts while support using CC310 bl. - - -// <i> Select a library version compatible with the configuration. When interrupts are disable, a version named _noint must be used - -#ifndef NRF_CRYPTO_BACKEND_CC310_BL_INTERRUPTS_ENABLED -#define NRF_CRYPTO_BACKEND_CC310_BL_INTERRUPTS_ENABLED 1 -#endif - -// </e> - -// <e> NRF_CRYPTO_BACKEND_CC310_ENABLED - Enable the ARM Cryptocell CC310 backend. - -// <i> The CC310 hardware-accelerated cryptography backend (only available on nRF52840). -//========================================================== -#ifndef NRF_CRYPTO_BACKEND_CC310_ENABLED -#define NRF_CRYPTO_BACKEND_CC310_ENABLED 0 -#endif -// <q> NRF_CRYPTO_BACKEND_CC310_AES_CBC_ENABLED - Enable the AES CBC mode using CC310. - - -#ifndef NRF_CRYPTO_BACKEND_CC310_AES_CBC_ENABLED -#define NRF_CRYPTO_BACKEND_CC310_AES_CBC_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_CC310_AES_CTR_ENABLED - Enable the AES CTR mode using CC310. - - -#ifndef NRF_CRYPTO_BACKEND_CC310_AES_CTR_ENABLED -#define NRF_CRYPTO_BACKEND_CC310_AES_CTR_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_CC310_AES_ECB_ENABLED - Enable the AES ECB mode using CC310. - - -#ifndef NRF_CRYPTO_BACKEND_CC310_AES_ECB_ENABLED -#define NRF_CRYPTO_BACKEND_CC310_AES_ECB_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_CC310_AES_CBC_MAC_ENABLED - Enable the AES CBC_MAC mode using CC310. - - -#ifndef NRF_CRYPTO_BACKEND_CC310_AES_CBC_MAC_ENABLED -#define NRF_CRYPTO_BACKEND_CC310_AES_CBC_MAC_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_CC310_AES_CMAC_ENABLED - Enable the AES CMAC mode using CC310. - - -#ifndef NRF_CRYPTO_BACKEND_CC310_AES_CMAC_ENABLED -#define NRF_CRYPTO_BACKEND_CC310_AES_CMAC_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_CC310_AES_CCM_ENABLED - Enable the AES CCM mode using CC310. - - -#ifndef NRF_CRYPTO_BACKEND_CC310_AES_CCM_ENABLED -#define NRF_CRYPTO_BACKEND_CC310_AES_CCM_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_CC310_AES_CCM_STAR_ENABLED - Enable the AES CCM* mode using CC310. - - -#ifndef NRF_CRYPTO_BACKEND_CC310_AES_CCM_STAR_ENABLED -#define NRF_CRYPTO_BACKEND_CC310_AES_CCM_STAR_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_CC310_CHACHA_POLY_ENABLED - Enable the CHACHA-POLY mode using CC310. - - -#ifndef NRF_CRYPTO_BACKEND_CC310_CHACHA_POLY_ENABLED -#define NRF_CRYPTO_BACKEND_CC310_CHACHA_POLY_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_CC310_ECC_SECP160R1_ENABLED - Enable the secp160r1 elliptic curve support using CC310. - - -#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP160R1_ENABLED -#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP160R1_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_CC310_ECC_SECP160R2_ENABLED - Enable the secp160r2 elliptic curve support using CC310. - - -#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP160R2_ENABLED -#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP160R2_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_CC310_ECC_SECP192R1_ENABLED - Enable the secp192r1 elliptic curve support using CC310. - - -#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP192R1_ENABLED -#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP192R1_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_CC310_ECC_SECP224R1_ENABLED - Enable the secp224r1 elliptic curve support using CC310. - - -#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP224R1_ENABLED -#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP224R1_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_CC310_ECC_SECP256R1_ENABLED - Enable the secp256r1 elliptic curve support using CC310. - - -#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP256R1_ENABLED -#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP256R1_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_CC310_ECC_SECP384R1_ENABLED - Enable the secp384r1 elliptic curve support using CC310. - - -#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP384R1_ENABLED -#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP384R1_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_CC310_ECC_SECP521R1_ENABLED - Enable the secp521r1 elliptic curve support using CC310. - - -#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP521R1_ENABLED -#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP521R1_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_CC310_ECC_SECP160K1_ENABLED - Enable the secp160k1 elliptic curve support using CC310. - - -#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP160K1_ENABLED -#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP160K1_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_CC310_ECC_SECP192K1_ENABLED - Enable the secp192k1 elliptic curve support using CC310. - - -#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP192K1_ENABLED -#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP192K1_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_CC310_ECC_SECP224K1_ENABLED - Enable the secp224k1 elliptic curve support using CC310. - - -#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP224K1_ENABLED -#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP224K1_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_CC310_ECC_SECP256K1_ENABLED - Enable the secp256k1 elliptic curve support using CC310. - - -#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP256K1_ENABLED -#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP256K1_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_CC310_ECC_CURVE25519_ENABLED - Enable the Curve25519 curve support using CC310. - - -#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_CURVE25519_ENABLED -#define NRF_CRYPTO_BACKEND_CC310_ECC_CURVE25519_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_CC310_ECC_ED25519_ENABLED - Enable the Ed25519 curve support using CC310. - - -#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_ED25519_ENABLED -#define NRF_CRYPTO_BACKEND_CC310_ECC_ED25519_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_CC310_HASH_SHA256_ENABLED - CC310 SHA-256 hash functionality. - - -// <i> CC310 backend implementation for hardware-accelerated SHA-256. - -#ifndef NRF_CRYPTO_BACKEND_CC310_HASH_SHA256_ENABLED -#define NRF_CRYPTO_BACKEND_CC310_HASH_SHA256_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_CC310_HASH_SHA512_ENABLED - CC310 SHA-512 hash functionality - - -// <i> CC310 backend implementation for SHA-512 (in software). - -#ifndef NRF_CRYPTO_BACKEND_CC310_HASH_SHA512_ENABLED -#define NRF_CRYPTO_BACKEND_CC310_HASH_SHA512_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_CC310_HMAC_SHA256_ENABLED - CC310 HMAC using SHA-256 - - -// <i> CC310 backend implementation for HMAC using hardware-accelerated SHA-256. - -#ifndef NRF_CRYPTO_BACKEND_CC310_HMAC_SHA256_ENABLED -#define NRF_CRYPTO_BACKEND_CC310_HMAC_SHA256_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_CC310_HMAC_SHA512_ENABLED - CC310 HMAC using SHA-512 - - -// <i> CC310 backend implementation for HMAC using SHA-512 (in software). - -#ifndef NRF_CRYPTO_BACKEND_CC310_HMAC_SHA512_ENABLED -#define NRF_CRYPTO_BACKEND_CC310_HMAC_SHA512_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_CC310_RNG_ENABLED - Enable RNG support using CC310. - - -#ifndef NRF_CRYPTO_BACKEND_CC310_RNG_ENABLED -#define NRF_CRYPTO_BACKEND_CC310_RNG_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_CC310_INTERRUPTS_ENABLED - Enable Interrupts while support using CC310. - - -// <i> Select a library version compatible with the configuration. When interrupts are disable, a version named _noint must be used - -#ifndef NRF_CRYPTO_BACKEND_CC310_INTERRUPTS_ENABLED -#define NRF_CRYPTO_BACKEND_CC310_INTERRUPTS_ENABLED 1 -#endif - -// </e> - -// <e> NRF_CRYPTO_BACKEND_CIFRA_ENABLED - Enable the Cifra backend. -//========================================================== -#ifndef NRF_CRYPTO_BACKEND_CIFRA_ENABLED -#define NRF_CRYPTO_BACKEND_CIFRA_ENABLED 0 -#endif -// <q> NRF_CRYPTO_BACKEND_CIFRA_AES_EAX_ENABLED - Enable the AES EAX mode using Cifra. - - -#ifndef NRF_CRYPTO_BACKEND_CIFRA_AES_EAX_ENABLED -#define NRF_CRYPTO_BACKEND_CIFRA_AES_EAX_ENABLED 1 -#endif - -// </e> - -// <e> NRF_CRYPTO_BACKEND_MBEDTLS_ENABLED - Enable the mbed TLS backend. -//========================================================== -#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ENABLED -#define NRF_CRYPTO_BACKEND_MBEDTLS_ENABLED 0 -#endif -// <q> NRF_CRYPTO_BACKEND_MBEDTLS_AES_CBC_ENABLED - Enable the AES CBC mode mbed TLS. - - -#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_AES_CBC_ENABLED -#define NRF_CRYPTO_BACKEND_MBEDTLS_AES_CBC_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_MBEDTLS_AES_CTR_ENABLED - Enable the AES CTR mode using mbed TLS. - - -#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_AES_CTR_ENABLED -#define NRF_CRYPTO_BACKEND_MBEDTLS_AES_CTR_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_MBEDTLS_AES_CFB_ENABLED - Enable the AES CFB mode using mbed TLS. - - -#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_AES_CFB_ENABLED -#define NRF_CRYPTO_BACKEND_MBEDTLS_AES_CFB_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_MBEDTLS_AES_ECB_ENABLED - Enable the AES ECB mode using mbed TLS. - - -#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_AES_ECB_ENABLED -#define NRF_CRYPTO_BACKEND_MBEDTLS_AES_ECB_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_MBEDTLS_AES_CBC_MAC_ENABLED - Enable the AES CBC MAC mode using mbed TLS. - - -#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_AES_CBC_MAC_ENABLED -#define NRF_CRYPTO_BACKEND_MBEDTLS_AES_CBC_MAC_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_MBEDTLS_AES_CMAC_ENABLED - Enable the AES CMAC mode using mbed TLS. - - -#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_AES_CMAC_ENABLED -#define NRF_CRYPTO_BACKEND_MBEDTLS_AES_CMAC_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_MBEDTLS_AES_CCM_ENABLED - Enable the AES CCM mode using mbed TLS. - - -#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_AES_CCM_ENABLED -#define NRF_CRYPTO_BACKEND_MBEDTLS_AES_CCM_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_MBEDTLS_AES_GCM_ENABLED - Enable the AES GCM mode using mbed TLS. - - -#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_AES_GCM_ENABLED -#define NRF_CRYPTO_BACKEND_MBEDTLS_AES_GCM_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP192R1_ENABLED - Enable secp192r1 (NIST 192-bit) curve - - -// <i> Enable this setting if you need secp192r1 (NIST 192-bit) support using MBEDTLS - -#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP192R1_ENABLED -#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP192R1_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP224R1_ENABLED - Enable secp224r1 (NIST 224-bit) curve - - -// <i> Enable this setting if you need secp224r1 (NIST 224-bit) support using MBEDTLS - -#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP224R1_ENABLED -#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP224R1_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP256R1_ENABLED - Enable secp256r1 (NIST 256-bit) curve - - -// <i> Enable this setting if you need secp256r1 (NIST 256-bit) support using MBEDTLS - -#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP256R1_ENABLED -#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP256R1_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP384R1_ENABLED - Enable secp384r1 (NIST 384-bit) curve - - -// <i> Enable this setting if you need secp384r1 (NIST 384-bit) support using MBEDTLS - -#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP384R1_ENABLED -#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP384R1_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP521R1_ENABLED - Enable secp521r1 (NIST 521-bit) curve - - -// <i> Enable this setting if you need secp521r1 (NIST 521-bit) support using MBEDTLS - -#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP521R1_ENABLED -#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP521R1_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP192K1_ENABLED - Enable secp192k1 (Koblitz 192-bit) curve - - -// <i> Enable this setting if you need secp192k1 (Koblitz 192-bit) support using MBEDTLS - -#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP192K1_ENABLED -#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP192K1_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP224K1_ENABLED - Enable secp224k1 (Koblitz 224-bit) curve - - -// <i> Enable this setting if you need secp224k1 (Koblitz 224-bit) support using MBEDTLS - -#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP224K1_ENABLED -#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP224K1_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP256K1_ENABLED - Enable secp256k1 (Koblitz 256-bit) curve - - -// <i> Enable this setting if you need secp256k1 (Koblitz 256-bit) support using MBEDTLS - -#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP256K1_ENABLED -#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP256K1_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_MBEDTLS_ECC_BP256R1_ENABLED - Enable bp256r1 (Brainpool 256-bit) curve - - -// <i> Enable this setting if you need bp256r1 (Brainpool 256-bit) support using MBEDTLS - -#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_BP256R1_ENABLED -#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_BP256R1_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_MBEDTLS_ECC_BP384R1_ENABLED - Enable bp384r1 (Brainpool 384-bit) curve - - -// <i> Enable this setting if you need bp384r1 (Brainpool 384-bit) support using MBEDTLS - -#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_BP384R1_ENABLED -#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_BP384R1_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_MBEDTLS_ECC_BP512R1_ENABLED - Enable bp512r1 (Brainpool 512-bit) curve - - -// <i> Enable this setting if you need bp512r1 (Brainpool 512-bit) support using MBEDTLS - -#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_BP512R1_ENABLED -#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_BP512R1_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_MBEDTLS_ECC_CURVE25519_ENABLED - Enable Curve25519 curve - - -// <i> Enable this setting if you need Curve25519 support using MBEDTLS - -#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_CURVE25519_ENABLED -#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_CURVE25519_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_MBEDTLS_HASH_SHA256_ENABLED - Enable mbed TLS SHA-256 hash functionality. - - -// <i> mbed TLS backend implementation for SHA-256. - -#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_HASH_SHA256_ENABLED -#define NRF_CRYPTO_BACKEND_MBEDTLS_HASH_SHA256_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_MBEDTLS_HASH_SHA512_ENABLED - Enable mbed TLS SHA-512 hash functionality. - - -// <i> mbed TLS backend implementation for SHA-512. - -#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_HASH_SHA512_ENABLED -#define NRF_CRYPTO_BACKEND_MBEDTLS_HASH_SHA512_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_MBEDTLS_HMAC_SHA256_ENABLED - Enable mbed TLS HMAC using SHA-256. - - -// <i> mbed TLS backend implementation for HMAC using SHA-256. - -#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_HMAC_SHA256_ENABLED -#define NRF_CRYPTO_BACKEND_MBEDTLS_HMAC_SHA256_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_MBEDTLS_HMAC_SHA512_ENABLED - Enable mbed TLS HMAC using SHA-512. - - -// <i> mbed TLS backend implementation for HMAC using SHA-512. - -#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_HMAC_SHA512_ENABLED -#define NRF_CRYPTO_BACKEND_MBEDTLS_HMAC_SHA512_ENABLED 1 -#endif - -// </e> - -// <e> NRF_CRYPTO_BACKEND_MICRO_ECC_ENABLED - Enable the micro-ecc backend. -//========================================================== -#ifndef NRF_CRYPTO_BACKEND_MICRO_ECC_ENABLED -#define NRF_CRYPTO_BACKEND_MICRO_ECC_ENABLED 0 -#endif -// <q> NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP192R1_ENABLED - Enable secp192r1 (NIST 192-bit) curve - - -// <i> Enable this setting if you need secp192r1 (NIST 192-bit) support using micro-ecc - -#ifndef NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP192R1_ENABLED -#define NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP192R1_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP224R1_ENABLED - Enable secp224r1 (NIST 224-bit) curve - - -// <i> Enable this setting if you need secp224r1 (NIST 224-bit) support using micro-ecc - -#ifndef NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP224R1_ENABLED -#define NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP224R1_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP256R1_ENABLED - Enable secp256r1 (NIST 256-bit) curve - - -// <i> Enable this setting if you need secp256r1 (NIST 256-bit) support using micro-ecc - -#ifndef NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP256R1_ENABLED -#define NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP256R1_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP256K1_ENABLED - Enable secp256k1 (Koblitz 256-bit) curve - - -// <i> Enable this setting if you need secp256k1 (Koblitz 256-bit) support using micro-ecc - -#ifndef NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP256K1_ENABLED -#define NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP256K1_ENABLED 1 -#endif - -// </e> - -// <e> NRF_CRYPTO_BACKEND_NRF_HW_RNG_ENABLED - Enable the nRF HW RNG backend. - -// <i> The nRF HW backend provide access to RNG peripheral in nRF5x devices. -//========================================================== -#ifndef NRF_CRYPTO_BACKEND_NRF_HW_RNG_ENABLED -#define NRF_CRYPTO_BACKEND_NRF_HW_RNG_ENABLED 1 -#endif -// <q> NRF_CRYPTO_BACKEND_NRF_HW_RNG_MBEDTLS_CTR_DRBG_ENABLED - Enable mbed TLS CTR-DRBG algorithm. - - -// <i> Enable mbed TLS CTR-DRBG standardized by NIST (NIST SP 800-90A Rev. 1). The nRF HW RNG is used as an entropy source for seeding. - -#ifndef NRF_CRYPTO_BACKEND_NRF_HW_RNG_MBEDTLS_CTR_DRBG_ENABLED -#define NRF_CRYPTO_BACKEND_NRF_HW_RNG_MBEDTLS_CTR_DRBG_ENABLED 1 -#endif - -// </e> - -// <e> NRF_CRYPTO_BACKEND_NRF_SW_ENABLED - Enable the legacy nRFx sw for crypto. - -// <i> The nRF SW cryptography backend (only used in bootloader context). -//========================================================== -#ifndef NRF_CRYPTO_BACKEND_NRF_SW_ENABLED -#define NRF_CRYPTO_BACKEND_NRF_SW_ENABLED 0 -#endif -// <q> NRF_CRYPTO_BACKEND_NRF_SW_HASH_SHA256_ENABLED - nRF SW hash backend support for SHA-256 - - -// <i> The nRF SW backend provide access to nRF SDK legacy hash implementation of SHA-256. - -#ifndef NRF_CRYPTO_BACKEND_NRF_SW_HASH_SHA256_ENABLED -#define NRF_CRYPTO_BACKEND_NRF_SW_HASH_SHA256_ENABLED 1 -#endif - -// </e> - -// <e> NRF_CRYPTO_BACKEND_OBERON_ENABLED - Enable the Oberon backend - -// <i> The Oberon backend -//========================================================== -#ifndef NRF_CRYPTO_BACKEND_OBERON_ENABLED -#define NRF_CRYPTO_BACKEND_OBERON_ENABLED 1 -#endif -// <q> NRF_CRYPTO_BACKEND_OBERON_CHACHA_POLY_ENABLED - Enable the CHACHA-POLY mode using Oberon. - - -#ifndef NRF_CRYPTO_BACKEND_OBERON_CHACHA_POLY_ENABLED -#define NRF_CRYPTO_BACKEND_OBERON_CHACHA_POLY_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_OBERON_ECC_SECP256R1_ENABLED - Enable secp256r1 curve - - -// <i> Enable this setting if you need secp256r1 curve support using Oberon library - -#ifndef NRF_CRYPTO_BACKEND_OBERON_ECC_SECP256R1_ENABLED -#define NRF_CRYPTO_BACKEND_OBERON_ECC_SECP256R1_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_OBERON_ECC_CURVE25519_ENABLED - Enable Curve25519 ECDH - - -// <i> Enable this setting if you need Curve25519 ECDH support using Oberon library - -#ifndef NRF_CRYPTO_BACKEND_OBERON_ECC_CURVE25519_ENABLED -#define NRF_CRYPTO_BACKEND_OBERON_ECC_CURVE25519_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_OBERON_ECC_ED25519_ENABLED - Enable Ed25519 signature scheme - - -// <i> Enable this setting if you need Ed25519 support using Oberon library - -#ifndef NRF_CRYPTO_BACKEND_OBERON_ECC_ED25519_ENABLED -#define NRF_CRYPTO_BACKEND_OBERON_ECC_ED25519_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_OBERON_HASH_SHA256_ENABLED - Oberon SHA-256 hash functionality - - -// <i> Oberon backend implementation for SHA-256. - -#ifndef NRF_CRYPTO_BACKEND_OBERON_HASH_SHA256_ENABLED -#define NRF_CRYPTO_BACKEND_OBERON_HASH_SHA256_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_OBERON_HASH_SHA512_ENABLED - Oberon SHA-512 hash functionality - - -// <i> Oberon backend implementation for SHA-512. - -#ifndef NRF_CRYPTO_BACKEND_OBERON_HASH_SHA512_ENABLED -#define NRF_CRYPTO_BACKEND_OBERON_HASH_SHA512_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_OBERON_HMAC_SHA256_ENABLED - Oberon HMAC using SHA-256 - - -// <i> Oberon backend implementation for HMAC using SHA-256. - -#ifndef NRF_CRYPTO_BACKEND_OBERON_HMAC_SHA256_ENABLED -#define NRF_CRYPTO_BACKEND_OBERON_HMAC_SHA256_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_BACKEND_OBERON_HMAC_SHA512_ENABLED - Oberon HMAC using SHA-512 - - -// <i> Oberon backend implementation for HMAC using SHA-512. - -#ifndef NRF_CRYPTO_BACKEND_OBERON_HMAC_SHA512_ENABLED -#define NRF_CRYPTO_BACKEND_OBERON_HMAC_SHA512_ENABLED 1 -#endif - -// </e> - -// <e> NRF_CRYPTO_BACKEND_OPTIGA_ENABLED - Enable the nrf_crypto Optiga Trust X backend. - -// <i> Enables the nrf_crypto backend for Optiga Trust X devices. -//========================================================== -#ifndef NRF_CRYPTO_BACKEND_OPTIGA_ENABLED -#define NRF_CRYPTO_BACKEND_OPTIGA_ENABLED 0 -#endif -// <q> NRF_CRYPTO_BACKEND_OPTIGA_RNG_ENABLED - Optiga backend support for RNG - - -// <i> The Optiga backend provide external chip RNG. - -#ifndef NRF_CRYPTO_BACKEND_OPTIGA_RNG_ENABLED -#define NRF_CRYPTO_BACKEND_OPTIGA_RNG_ENABLED 0 -#endif - -// <q> NRF_CRYPTO_BACKEND_OPTIGA_ECC_SECP256R1_ENABLED - Optiga backend support for ECC secp256r1 - - -// <i> The Optiga backend provide external chip ECC using secp256r1. - -#ifndef NRF_CRYPTO_BACKEND_OPTIGA_ECC_SECP256R1_ENABLED -#define NRF_CRYPTO_BACKEND_OPTIGA_ECC_SECP256R1_ENABLED 1 -#endif - -// </e> - -// <q> NRF_CRYPTO_CURVE25519_BIG_ENDIAN_ENABLED - Big-endian byte order in raw Curve25519 data - - -// <i> Enable big-endian byte order in Curve25519 API, if set to 1. Use little-endian, if set to 0. - -#ifndef NRF_CRYPTO_CURVE25519_BIG_ENDIAN_ENABLED -#define NRF_CRYPTO_CURVE25519_BIG_ENDIAN_ENABLED 0 -#endif - -// </e> - -// <h> nrf_crypto_rng - RNG Configuration - -//========================================================== -// <q> NRF_CRYPTO_RNG_STATIC_MEMORY_BUFFERS_ENABLED - Use static memory buffers for context and temporary init buffer. - - -// <i> Always recommended when using the nRF HW RNG as the context and temporary buffers are small. Consider disabling if using the CC310 RNG in a RAM constrained application. In this case, memory must be provided to nrf_crypto_rng_init, or it can be allocated internally provided that NRF_CRYPTO_ALLOCATOR does not allocate memory on the stack. - -#ifndef NRF_CRYPTO_RNG_STATIC_MEMORY_BUFFERS_ENABLED -#define NRF_CRYPTO_RNG_STATIC_MEMORY_BUFFERS_ENABLED 1 -#endif - -// <q> NRF_CRYPTO_RNG_AUTO_INIT_ENABLED - Initialize the RNG module automatically when nrf_crypto is initialized. - - -// <i> Automatic initialization is only supported with static or internally allocated context and temporary memory. - -#ifndef NRF_CRYPTO_RNG_AUTO_INIT_ENABLED -#define NRF_CRYPTO_RNG_AUTO_INIT_ENABLED 1 -#endif - -// </h> -//========================================================== - -// <h> nRF_Libraries - -//========================================================== -// <q> APP_FIFO_ENABLED - app_fifo - Software FIFO implementation - - -#ifndef APP_FIFO_ENABLED -#define APP_FIFO_ENABLED 1 -#endif - -// <q> APP_GPIOTE_ENABLED - app_gpiote - GPIOTE events dispatcher - - -#ifndef APP_GPIOTE_ENABLED -#define APP_GPIOTE_ENABLED 1 -#endif - -// <q> APP_PWM_ENABLED - app_pwm - PWM functionality - - -#ifndef APP_PWM_ENABLED -#define APP_PWM_ENABLED 1 -#endif - -// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler -//========================================================== -#ifndef APP_SCHEDULER_ENABLED -#define APP_SCHEDULER_ENABLED 1 -#endif -// <q> APP_SCHEDULER_WITH_PAUSE - Enabling pause feature - - -#ifndef APP_SCHEDULER_WITH_PAUSE -#define APP_SCHEDULER_WITH_PAUSE 0 -#endif - -// <q> APP_SCHEDULER_WITH_PROFILER - Enabling scheduler profiling - - -#ifndef APP_SCHEDULER_WITH_PROFILER -#define APP_SCHEDULER_WITH_PROFILER 0 -#endif - -// </e> - -// <e> APP_SDCARD_ENABLED - app_sdcard - SD/MMC card support using SPI -//========================================================== -#ifndef APP_SDCARD_ENABLED -#define APP_SDCARD_ENABLED 1 -#endif -// <o> APP_SDCARD_SPI_INSTANCE - SPI instance used - -// <0=> 0 -// <1=> 1 -// <2=> 2 - -#ifndef APP_SDCARD_SPI_INSTANCE -#define APP_SDCARD_SPI_INSTANCE 0 -#endif - -// <o> APP_SDCARD_FREQ_INIT - SPI frequency - -// <33554432=> 125 kHz -// <67108864=> 250 kHz -// <134217728=> 500 kHz -// <268435456=> 1 MHz -// <536870912=> 2 MHz -// <1073741824=> 4 MHz -// <2147483648=> 8 MHz - -#ifndef APP_SDCARD_FREQ_INIT -#define APP_SDCARD_FREQ_INIT 67108864 -#endif - -// <o> APP_SDCARD_FREQ_DATA - SPI frequency - -// <33554432=> 125 kHz -// <67108864=> 250 kHz -// <134217728=> 500 kHz -// <268435456=> 1 MHz -// <536870912=> 2 MHz -// <1073741824=> 4 MHz -// <2147483648=> 8 MHz - -#ifndef APP_SDCARD_FREQ_DATA -#define APP_SDCARD_FREQ_DATA 1073741824 -#endif - -// </e> - -// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality -//========================================================== -#ifndef APP_TIMER_ENABLED -#define APP_TIMER_ENABLED 1 -#endif -// <o> APP_TIMER_CONFIG_RTC_FREQUENCY - Configure RTC prescaler. - -// <0=> 32768 Hz -// <1=> 16384 Hz -// <3=> 8192 Hz -// <7=> 4096 Hz -// <15=> 2048 Hz -// <31=> 1024 Hz - -#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY -#define APP_TIMER_CONFIG_RTC_FREQUENCY 0 -#endif - -// <o> APP_TIMER_CONFIG_IRQ_PRIORITY - Interrupt priority - - -// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice -// <0=> 0 (highest) -// <1=> 1 -// <2=> 2 -// <3=> 3 -// <4=> 4 -// <5=> 5 -// <6=> 6 -// <7=> 7 - -#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY -#define APP_TIMER_CONFIG_IRQ_PRIORITY 6 -#endif - -// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. -// <i> Size of the queue depends on how many timers are used -// <i> in the system, how often timers are started and overall -// <i> system latency. If queue size is too small app_timer calls -// <i> will fail. - -#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE -#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10 -#endif - -// <q> APP_TIMER_CONFIG_USE_SCHEDULER - Enable scheduling app_timer events to app_scheduler - - -#ifndef APP_TIMER_CONFIG_USE_SCHEDULER -#define APP_TIMER_CONFIG_USE_SCHEDULER 0 -#endif - -// <q> APP_TIMER_KEEPS_RTC_ACTIVE - Enable RTC always on - - -// <i> If option is enabled RTC is kept running even if there is no active timers. -// <i> This option can be used when app_timer is used for timestamping. - -#ifndef APP_TIMER_KEEPS_RTC_ACTIVE -#define APP_TIMER_KEEPS_RTC_ACTIVE 0 -#endif - -// <o> APP_TIMER_SAFE_WINDOW_MS - Maximum possible latency (in milliseconds) of handling app_timer event. -// <i> Maximum possible timeout that can be set is reduced by safe window. -// <i> Example: RTC frequency 16384 Hz, maximum possible timeout 1024 seconds - APP_TIMER_SAFE_WINDOW_MS. -// <i> Since RTC is not stopped when processor is halted in debugging session, this value -// <i> must cover it if debugging is needed. It is possible to halt processor for APP_TIMER_SAFE_WINDOW_MS -// <i> without corrupting app_timer behavior. - -#ifndef APP_TIMER_SAFE_WINDOW_MS -#define APP_TIMER_SAFE_WINDOW_MS 300000 -#endif - -// <h> App Timer Legacy configuration - Legacy configuration. - -//========================================================== -// <q> APP_TIMER_WITH_PROFILER - Enable app_timer profiling - - -#ifndef APP_TIMER_WITH_PROFILER -#define APP_TIMER_WITH_PROFILER 0 -#endif - -// <q> APP_TIMER_CONFIG_SWI_NUMBER - Configure SWI instance used. - - -#ifndef APP_TIMER_CONFIG_SWI_NUMBER -#define APP_TIMER_CONFIG_SWI_NUMBER 0 -#endif - -// </h> -//========================================================== - -// </e> - -// <e> APP_UART_ENABLED - app_uart - UART driver -//========================================================== -#ifndef APP_UART_ENABLED -#define APP_UART_ENABLED 1 -#endif -// <o> APP_UART_DRIVER_INSTANCE - UART instance used - -// <0=> 0 - -#ifndef APP_UART_DRIVER_INSTANCE -#define APP_UART_DRIVER_INSTANCE 0 -#endif - -// </e> - -// <q> CRC16_ENABLED - crc16 - CRC16 calculation routines - - -#ifndef CRC16_ENABLED -#define CRC16_ENABLED 1 -#endif - -// <q> CRC32_ENABLED - crc32 - CRC32 calculation routines - - -#ifndef CRC32_ENABLED -#define CRC32_ENABLED 1 -#endif - -// <q> ECC_ENABLED - ecc - Elliptic Curve Cryptography Library - - -#ifndef ECC_ENABLED -#define ECC_ENABLED 0 -#endif - -// <e> FDS_ENABLED - fds - Flash data storage module -//========================================================== -#ifndef FDS_ENABLED -#define FDS_ENABLED 1 -#endif -// <h> Pages - Virtual page settings - -// <i> Configure the number of virtual pages to use and their size. -//========================================================== -// <o> FDS_VIRTUAL_PAGES - Number of virtual flash pages to use. -// <i> One of the virtual pages is reserved by the system for garbage collection. -// <i> Therefore, the minimum is two virtual pages: one page to store data and one page to be used by the system for garbage collection. -// <i> The total amount of flash memory that is used by FDS amounts to @ref FDS_VIRTUAL_PAGES * @ref FDS_VIRTUAL_PAGE_SIZE * 4 bytes. - -#ifndef FDS_VIRTUAL_PAGES -#define FDS_VIRTUAL_PAGES 3 -#endif - -// <o> FDS_VIRTUAL_PAGE_SIZE - The size of a virtual flash page. - - -// <i> Expressed in number of 4-byte words. -// <i> By default, a virtual page is the same size as a physical page. -// <i> The size of a virtual page must be a multiple of the size of a physical page. -// <1024=> 1024 -// <2048=> 2048 - -#ifndef FDS_VIRTUAL_PAGE_SIZE -#define FDS_VIRTUAL_PAGE_SIZE 1024 -#endif - -// <o> FDS_VIRTUAL_PAGES_RESERVED - The number of virtual flash pages that are used by other modules. -// <i> FDS module stores its data in the last pages of the flash memory. -// <i> By setting this value, you can move flash end address used by the FDS. -// <i> As a result the reserved space can be used by other modules. - -#ifndef FDS_VIRTUAL_PAGES_RESERVED -#define FDS_VIRTUAL_PAGES_RESERVED 0 -#endif - -// </h> -//========================================================== - -// <h> Backend - Backend configuration - -// <i> Configure which nrf_fstorage backend is used by FDS to write to flash. -//========================================================== -// <o> FDS_BACKEND - FDS flash backend. - - -// <i> NRF_FSTORAGE_SD uses the nrf_fstorage_sd backend implementation using the SoftDevice API. Use this if you have a SoftDevice present. -// <i> NRF_FSTORAGE_NVMC uses the nrf_fstorage_nvmc implementation. Use this setting if you don't use the SoftDevice. -// <1=> NRF_FSTORAGE_NVMC -// <2=> NRF_FSTORAGE_SD - -#ifndef FDS_BACKEND -#define FDS_BACKEND 1 -#endif - -// </h> -//========================================================== - -// <h> Queue - Queue settings - -//========================================================== -// <o> FDS_OP_QUEUE_SIZE - Size of the internal queue. -// <i> Increase this value if you frequently get synchronous FDS_ERR_NO_SPACE_IN_QUEUES errors. - -#ifndef FDS_OP_QUEUE_SIZE -#define FDS_OP_QUEUE_SIZE 4 -#endif - -// </h> -//========================================================== - -// <h> CRC - CRC functionality - -//========================================================== -// <e> FDS_CRC_CHECK_ON_READ - Enable CRC checks. - -// <i> Save a record's CRC when it is written to flash and check it when the record is opened. -// <i> Records with an incorrect CRC can still be 'seen' by the user using FDS functions, but they cannot be opened. -// <i> Additionally, they will not be garbage collected until they are deleted. -//========================================================== -#ifndef FDS_CRC_CHECK_ON_READ -#define FDS_CRC_CHECK_ON_READ 0 -#endif -// <o> FDS_CRC_CHECK_ON_WRITE - Perform a CRC check on newly written records. - - -// <i> Perform a CRC check on newly written records. -// <i> This setting can be used to make sure that the record data was not altered while being written to flash. -// <1=> Enabled -// <0=> Disabled - -#ifndef FDS_CRC_CHECK_ON_WRITE -#define FDS_CRC_CHECK_ON_WRITE 0 -#endif - -// </e> - -// </h> -//========================================================== - -// <h> Users - Number of users - -//========================================================== -// <o> FDS_MAX_USERS - Maximum number of callbacks that can be registered. -#ifndef FDS_MAX_USERS -#define FDS_MAX_USERS 4 -#endif - -// </h> -//========================================================== - -// </e> - -// <q> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release - - -#ifndef HARDFAULT_HANDLER_ENABLED -#define HARDFAULT_HANDLER_ENABLED 1 -#endif - -// <e> HCI_MEM_POOL_ENABLED - hci_mem_pool - memory pool implementation used by HCI -//========================================================== -#ifndef HCI_MEM_POOL_ENABLED -#define HCI_MEM_POOL_ENABLED 1 -#endif -// <o> HCI_TX_BUF_SIZE - TX buffer size in bytes. -#ifndef HCI_TX_BUF_SIZE -#define HCI_TX_BUF_SIZE 600 -#endif - -// <o> HCI_RX_BUF_SIZE - RX buffer size in bytes. -#ifndef HCI_RX_BUF_SIZE -#define HCI_RX_BUF_SIZE 600 -#endif - -// <o> HCI_RX_BUF_QUEUE_SIZE - RX buffer queue size. -#ifndef HCI_RX_BUF_QUEUE_SIZE -#define HCI_RX_BUF_QUEUE_SIZE 4 -#endif - -// </e> - -// <e> HCI_SLIP_ENABLED - hci_slip - SLIP protocol implementation used by HCI -//========================================================== -#ifndef HCI_SLIP_ENABLED -#define HCI_SLIP_ENABLED 1 -#endif -// <o> HCI_UART_BAUDRATE - Default Baudrate - -// <323584=> 1200 baud -// <643072=> 2400 baud -// <1290240=> 4800 baud -// <2576384=> 9600 baud -// <3862528=> 14400 baud -// <5152768=> 19200 baud -// <7716864=> 28800 baud -// <10289152=> 38400 baud -// <15400960=> 57600 baud -// <20615168=> 76800 baud -// <30801920=> 115200 baud -// <61865984=> 230400 baud -// <67108864=> 250000 baud -// <121634816=> 460800 baud -// <251658240=> 921600 baud -// <268435456=> 1000000 baud - -#ifndef HCI_UART_BAUDRATE -#define HCI_UART_BAUDRATE 30801920 -#endif - -// <o> HCI_UART_FLOW_CONTROL - Hardware Flow Control - -// <0=> Disabled -// <1=> Enabled - -#ifndef HCI_UART_FLOW_CONTROL -#define HCI_UART_FLOW_CONTROL 0 -#endif - -// <o> HCI_UART_RX_PIN - UART RX pin -#ifndef HCI_UART_RX_PIN -#define HCI_UART_RX_PIN 8 -#endif - -// <o> HCI_UART_TX_PIN - UART TX pin -#ifndef HCI_UART_TX_PIN -#define HCI_UART_TX_PIN 6 -#endif - -// <o> HCI_UART_RTS_PIN - UART RTS pin -#ifndef HCI_UART_RTS_PIN -#define HCI_UART_RTS_PIN 5 -#endif - -// <o> HCI_UART_CTS_PIN - UART CTS pin -#ifndef HCI_UART_CTS_PIN -#define HCI_UART_CTS_PIN 7 -#endif - -// </e> - -// <e> HCI_TRANSPORT_ENABLED - hci_transport - HCI transport -//========================================================== -#ifndef HCI_TRANSPORT_ENABLED -#define HCI_TRANSPORT_ENABLED 1 -#endif -// <o> HCI_MAX_PACKET_SIZE_IN_BITS - Maximum size of a single application packet in bits. -#ifndef HCI_MAX_PACKET_SIZE_IN_BITS -#define HCI_MAX_PACKET_SIZE_IN_BITS 8000 -#endif - -// </e> - -// <q> LED_SOFTBLINK_ENABLED - led_softblink - led_softblink module - - -#ifndef LED_SOFTBLINK_ENABLED -#define LED_SOFTBLINK_ENABLED 1 -#endif - -// <q> LOW_POWER_PWM_ENABLED - low_power_pwm - low_power_pwm module - - -#ifndef LOW_POWER_PWM_ENABLED -#define LOW_POWER_PWM_ENABLED 1 -#endif - -// <e> MEM_MANAGER_ENABLED - mem_manager - Dynamic memory allocator -//========================================================== -#ifndef MEM_MANAGER_ENABLED -#define MEM_MANAGER_ENABLED 1 -#endif -// <o> MEMORY_MANAGER_SMALL_BLOCK_COUNT - Size of each memory blocks identified as 'small' block. <0-255> - - -#ifndef MEMORY_MANAGER_SMALL_BLOCK_COUNT -#define MEMORY_MANAGER_SMALL_BLOCK_COUNT 1 -#endif - -// <o> MEMORY_MANAGER_SMALL_BLOCK_SIZE - Size of each memory blocks identified as 'small' block. -// <i> Size of each memory blocks identified as 'small' block. Memory block are recommended to be word-sized. - -#ifndef MEMORY_MANAGER_SMALL_BLOCK_SIZE -#define MEMORY_MANAGER_SMALL_BLOCK_SIZE 32 -#endif - -// <o> MEMORY_MANAGER_MEDIUM_BLOCK_COUNT - Size of each memory blocks identified as 'medium' block. <0-255> - - -#ifndef MEMORY_MANAGER_MEDIUM_BLOCK_COUNT -#define MEMORY_MANAGER_MEDIUM_BLOCK_COUNT 0 -#endif - -// <o> MEMORY_MANAGER_MEDIUM_BLOCK_SIZE - Size of each memory blocks identified as 'medium' block. -// <i> Size of each memory blocks identified as 'medium' block. Memory block are recommended to be word-sized. - -#ifndef MEMORY_MANAGER_MEDIUM_BLOCK_SIZE -#define MEMORY_MANAGER_MEDIUM_BLOCK_SIZE 256 -#endif - -// <o> MEMORY_MANAGER_LARGE_BLOCK_COUNT - Size of each memory blocks identified as 'large' block. <0-255> - - -#ifndef MEMORY_MANAGER_LARGE_BLOCK_COUNT -#define MEMORY_MANAGER_LARGE_BLOCK_COUNT 0 -#endif - -// <o> MEMORY_MANAGER_LARGE_BLOCK_SIZE - Size of each memory blocks identified as 'large' block. -// <i> Size of each memory blocks identified as 'large' block. Memory block are recommended to be word-sized. - -#ifndef MEMORY_MANAGER_LARGE_BLOCK_SIZE -#define MEMORY_MANAGER_LARGE_BLOCK_SIZE 256 -#endif - -// <o> MEMORY_MANAGER_XLARGE_BLOCK_COUNT - Size of each memory blocks identified as 'extra large' block. <0-255> - - -#ifndef MEMORY_MANAGER_XLARGE_BLOCK_COUNT -#define MEMORY_MANAGER_XLARGE_BLOCK_COUNT 0 -#endif - -// <o> MEMORY_MANAGER_XLARGE_BLOCK_SIZE - Size of each memory blocks identified as 'extra large' block. -// <i> Size of each memory blocks identified as 'extra large' block. Memory block are recommended to be word-sized. - -#ifndef MEMORY_MANAGER_XLARGE_BLOCK_SIZE -#define MEMORY_MANAGER_XLARGE_BLOCK_SIZE 1320 -#endif - -// <o> MEMORY_MANAGER_XXLARGE_BLOCK_COUNT - Size of each memory blocks identified as 'extra extra large' block. <0-255> - - -#ifndef MEMORY_MANAGER_XXLARGE_BLOCK_COUNT -#define MEMORY_MANAGER_XXLARGE_BLOCK_COUNT 0 -#endif - -// <o> MEMORY_MANAGER_XXLARGE_BLOCK_SIZE - Size of each memory blocks identified as 'extra extra large' block. -// <i> Size of each memory blocks identified as 'extra extra large' block. Memory block are recommended to be word-sized. - -#ifndef MEMORY_MANAGER_XXLARGE_BLOCK_SIZE -#define MEMORY_MANAGER_XXLARGE_BLOCK_SIZE 3444 -#endif - -// <o> MEMORY_MANAGER_XSMALL_BLOCK_COUNT - Size of each memory blocks identified as 'extra small' block. <0-255> - - -#ifndef MEMORY_MANAGER_XSMALL_BLOCK_COUNT -#define MEMORY_MANAGER_XSMALL_BLOCK_COUNT 0 -#endif - -// <o> MEMORY_MANAGER_XSMALL_BLOCK_SIZE - Size of each memory blocks identified as 'extra small' block. -// <i> Size of each memory blocks identified as 'extra large' block. Memory block are recommended to be word-sized. - -#ifndef MEMORY_MANAGER_XSMALL_BLOCK_SIZE -#define MEMORY_MANAGER_XSMALL_BLOCK_SIZE 64 -#endif - -// <o> MEMORY_MANAGER_XXSMALL_BLOCK_COUNT - Size of each memory blocks identified as 'extra extra small' block. <0-255> - - -#ifndef MEMORY_MANAGER_XXSMALL_BLOCK_COUNT -#define MEMORY_MANAGER_XXSMALL_BLOCK_COUNT 0 -#endif - -// <o> MEMORY_MANAGER_XXSMALL_BLOCK_SIZE - Size of each memory blocks identified as 'extra extra small' block. -// <i> Size of each memory blocks identified as 'extra extra small' block. Memory block are recommended to be word-sized. - -#ifndef MEMORY_MANAGER_XXSMALL_BLOCK_SIZE -#define MEMORY_MANAGER_XXSMALL_BLOCK_SIZE 32 -#endif - -// <e> MEM_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef MEM_MANAGER_CONFIG_LOG_ENABLED -#define MEM_MANAGER_CONFIG_LOG_ENABLED 0 -#endif -// <o> MEM_MANAGER_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef MEM_MANAGER_CONFIG_LOG_LEVEL -#define MEM_MANAGER_CONFIG_LOG_LEVEL 3 -#endif - -// <o> MEM_MANAGER_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef MEM_MANAGER_CONFIG_INFO_COLOR -#define MEM_MANAGER_CONFIG_INFO_COLOR 0 -#endif - -// <o> MEM_MANAGER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef MEM_MANAGER_CONFIG_DEBUG_COLOR -#define MEM_MANAGER_CONFIG_DEBUG_COLOR 0 -#endif - -// </e> - -// <q> MEM_MANAGER_DISABLE_API_PARAM_CHECK - Disable API parameter checks in the module. - - -#ifndef MEM_MANAGER_DISABLE_API_PARAM_CHECK -#define MEM_MANAGER_DISABLE_API_PARAM_CHECK 0 -#endif - -// </e> - -// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module -//========================================================== -#ifndef NRF_BALLOC_ENABLED -#define NRF_BALLOC_ENABLED 1 -#endif -// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module. -//========================================================== -#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED -#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0 -#endif -// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard. <0-255> - - -#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS -#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1 -#endif - -// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard. <0-255> - - -#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS -#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1 -#endif - -// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED - Enables basic checks in this module. - - -#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED -#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0 -#endif - -// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED - Enables double memory free check in this module. - - -#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED -#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0 -#endif - -// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED - Enables free memory corruption check in this module. - - -#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED -#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0 -#endif - -// <q> NRF_BALLOC_CLI_CMDS - Enable CLI commands specific to the module - - -#ifndef NRF_BALLOC_CLI_CMDS -#define NRF_BALLOC_CLI_CMDS 1 -#endif - -// </e> - -// </e> - -// <q> NRF_CLI_UART_ENABLED - nrf_cli_uart - UART command line interface transport - - -#ifndef NRF_CLI_UART_ENABLED -#define NRF_CLI_UART_ENABLED 1 -#endif - -// <e> NRF_CSENSE_ENABLED - nrf_csense - Capacitive sensor module -//========================================================== -#ifndef NRF_CSENSE_ENABLED -#define NRF_CSENSE_ENABLED 1 -#endif -// <o> NRF_CSENSE_PAD_HYSTERESIS - Minimum value of change required to determine that a pad was touched. -#ifndef NRF_CSENSE_PAD_HYSTERESIS -#define NRF_CSENSE_PAD_HYSTERESIS 15 -#endif - -// <o> NRF_CSENSE_PAD_DEVIATION - Minimum value measured on a pad required to take it into account while calculating the step. -#ifndef NRF_CSENSE_PAD_DEVIATION -#define NRF_CSENSE_PAD_DEVIATION 70 -#endif - -// <o> NRF_CSENSE_MIN_PAD_VALUE - Minimum normalized value on a pad required to take its value into account. -#ifndef NRF_CSENSE_MIN_PAD_VALUE -#define NRF_CSENSE_MIN_PAD_VALUE 20 -#endif - -// <o> NRF_CSENSE_MAX_PADS_NUMBER - Maximum number of pads used for one instance. -#ifndef NRF_CSENSE_MAX_PADS_NUMBER -#define NRF_CSENSE_MAX_PADS_NUMBER 20 -#endif - -// <o> NRF_CSENSE_MAX_VALUE - Maximum normalized value obtained from measurement. -#ifndef NRF_CSENSE_MAX_VALUE -#define NRF_CSENSE_MAX_VALUE 1000 -#endif - -// <o> NRF_CSENSE_OUTPUT_PIN - Output pin used by the low-level module. -// <i> This is used when capacitive sensor does not use COMP. - -#ifndef NRF_CSENSE_OUTPUT_PIN -#define NRF_CSENSE_OUTPUT_PIN 26 -#endif - -// </e> - -// <e> NRF_DRV_CSENSE_ENABLED - nrf_drv_csense - Capacitive sensor low-level module -//========================================================== -#ifndef NRF_DRV_CSENSE_ENABLED -#define NRF_DRV_CSENSE_ENABLED 1 -#endif -// <e> USE_COMP - Use the comparator to implement the capacitive sensor driver. - -// <i> Due to Anomaly 84, COMP I_SOURCE is not functional. It has too high a varation. -//========================================================== -#ifndef USE_COMP -#define USE_COMP 0 -#endif -// <o> TIMER0_FOR_CSENSE - First TIMER instance used by the driver (not used on nRF51). -#ifndef TIMER0_FOR_CSENSE -#define TIMER0_FOR_CSENSE 1 -#endif - -// <o> TIMER1_FOR_CSENSE - Second TIMER instance used by the driver (not used on nRF51). -#ifndef TIMER1_FOR_CSENSE -#define TIMER1_FOR_CSENSE 2 -#endif - -// <o> MEASUREMENT_PERIOD - Single measurement period. -// <i> Time of a single measurement can be calculated as -// <i> T = (1/2)*MEASUREMENT_PERIOD*(1/f_OSC) where f_OSC = I_SOURCE / (2C*(VUP-VDOWN) ). -// <i> I_SOURCE, VUP, and VDOWN are values used to initialize COMP and C is the capacitance of the used pad. - -#ifndef MEASUREMENT_PERIOD -#define MEASUREMENT_PERIOD 20 -#endif - -// </e> - -// </e> - -// <e> NRF_FSTORAGE_ENABLED - nrf_fstorage - Flash abstraction library -//========================================================== -#ifndef NRF_FSTORAGE_ENABLED -#define NRF_FSTORAGE_ENABLED 1 -#endif -// <h> nrf_fstorage - Common settings - -// <i> Common settings to all fstorage implementations -//========================================================== -// <q> NRF_FSTORAGE_PARAM_CHECK_DISABLED - Disable user input validation - - -// <i> If selected, use ASSERT to validate user input. -// <i> This effectively removes user input validation in production code. -// <i> Recommended setting: OFF, only enable this setting if size is a major concern. - -#ifndef NRF_FSTORAGE_PARAM_CHECK_DISABLED -#define NRF_FSTORAGE_PARAM_CHECK_DISABLED 0 -#endif - -// </h> -//========================================================== - -// <h> nrf_fstorage_sd - Implementation using the SoftDevice - -// <i> Configuration options for the fstorage implementation using the SoftDevice -//========================================================== -// <o> NRF_FSTORAGE_SD_QUEUE_SIZE - Size of the internal queue of operations -// <i> Increase this value if API calls frequently return the error @ref NRF_ERROR_NO_MEM. - -#ifndef NRF_FSTORAGE_SD_QUEUE_SIZE -#define NRF_FSTORAGE_SD_QUEUE_SIZE 4 -#endif - -// <o> NRF_FSTORAGE_SD_MAX_RETRIES - Maximum number of attempts at executing an operation when the SoftDevice is busy -// <i> Increase this value if events frequently return the @ref NRF_ERROR_TIMEOUT error. -// <i> The SoftDevice might fail to schedule flash access due to high BLE activity. - -#ifndef NRF_FSTORAGE_SD_MAX_RETRIES -#define NRF_FSTORAGE_SD_MAX_RETRIES 8 -#endif - -// <o> NRF_FSTORAGE_SD_MAX_WRITE_SIZE - Maximum number of bytes to be written to flash in a single operation -// <i> This value must be a multiple of four. -// <i> Lowering this value can increase the chances of the SoftDevice being able to execute flash operations in between radio activity. -// <i> This value is bound by the maximum number of bytes that can be written to flash in a single call to @ref sd_flash_write. -// <i> That is 1024 bytes for nRF51 ICs and 4096 bytes for nRF52 ICs. - -#ifndef NRF_FSTORAGE_SD_MAX_WRITE_SIZE -#define NRF_FSTORAGE_SD_MAX_WRITE_SIZE 4096 -#endif - -// </h> -//========================================================== - -// </e> - -// <q> NRF_GFX_ENABLED - nrf_gfx - GFX module - - -#ifndef NRF_GFX_ENABLED -#define NRF_GFX_ENABLED 1 -#endif - -// <q> NRF_MEMOBJ_ENABLED - nrf_memobj - Linked memory allocator module - - -#ifndef NRF_MEMOBJ_ENABLED -#define NRF_MEMOBJ_ENABLED 1 -#endif - -// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module -//========================================================== -#ifndef NRF_PWR_MGMT_ENABLED -#define NRF_PWR_MGMT_ENABLED 1 -#endif -// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module. - -// <i> Selected pin will be set when CPU is in sleep mode. -//========================================================== -#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED -#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0 -#endif -// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN - Pin number - -// <0=> 0 (P0.0) -// <1=> 1 (P0.1) -// <2=> 2 (P0.2) -// <3=> 3 (P0.3) -// <4=> 4 (P0.4) -// <5=> 5 (P0.5) -// <6=> 6 (P0.6) -// <7=> 7 (P0.7) -// <8=> 8 (P0.8) -// <9=> 9 (P0.9) -// <10=> 10 (P0.10) -// <11=> 11 (P0.11) -// <12=> 12 (P0.12) -// <13=> 13 (P0.13) -// <14=> 14 (P0.14) -// <15=> 15 (P0.15) -// <16=> 16 (P0.16) -// <17=> 17 (P0.17) -// <18=> 18 (P0.18) -// <19=> 19 (P0.19) -// <20=> 20 (P0.20) -// <21=> 21 (P0.21) -// <22=> 22 (P0.22) -// <23=> 23 (P0.23) -// <24=> 24 (P0.24) -// <25=> 25 (P0.25) -// <26=> 26 (P0.26) -// <27=> 27 (P0.27) -// <28=> 28 (P0.28) -// <29=> 29 (P0.29) -// <30=> 30 (P0.30) -// <31=> 31 (P0.31) -// <4294967295=> Not connected - -#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN -#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31 -#endif - -// </e> - -// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED - Enables CPU usage monitor. - - -// <i> Module will trace percentage of CPU usage in one second intervals. - -#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED -#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0 -#endif - -// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout. -//========================================================== -#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED -#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0 -#endif -// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). -// <i> Shutdown procedure will begin no earlier than after this number of seconds. - -#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S -#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3 -#endif - -// </e> - -// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED - Enables FPU event cleaning. - - -#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED -#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1 -#endif - -// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY - Blocked shutdown procedure will be retried every second. - - -#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY -#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0 -#endif - -// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER - Module will use @ref app_scheduler. - - -#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER -#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0 -#endif - -// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. -// <i> The number of stages of the shutdown process. - -#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT -#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3 -#endif - -// </e> - -// <e> NRF_QUEUE_ENABLED - nrf_queue - Queue module -//========================================================== -#ifndef NRF_QUEUE_ENABLED -#define NRF_QUEUE_ENABLED 1 -#endif -// <q> NRF_QUEUE_CLI_CMDS - Enable CLI commands specific to the module - - -#ifndef NRF_QUEUE_CLI_CMDS -#define NRF_QUEUE_CLI_CMDS 1 -#endif - -// </e> - -// <q> NRF_SECTION_ITER_ENABLED - nrf_section_iter - Section iterator - - -#ifndef NRF_SECTION_ITER_ENABLED -#define NRF_SECTION_ITER_ENABLED 1 -#endif - -// <q> NRF_SORTLIST_ENABLED - nrf_sortlist - Sorted list - - -#ifndef NRF_SORTLIST_ENABLED -#define NRF_SORTLIST_ENABLED 1 -#endif - -// <q> NRF_SPI_MNGR_ENABLED - nrf_spi_mngr - SPI transaction manager - - -#ifndef NRF_SPI_MNGR_ENABLED -#define NRF_SPI_MNGR_ENABLED 1 -#endif - -// <q> NRF_STRERROR_ENABLED - nrf_strerror - Library for converting error code to string. - - -#ifndef NRF_STRERROR_ENABLED -#define NRF_STRERROR_ENABLED 1 -#endif - -// <q> NRF_TWI_MNGR_ENABLED - nrf_twi_mngr - TWI transaction manager - - -#ifndef NRF_TWI_MNGR_ENABLED -#define NRF_TWI_MNGR_ENABLED 1 -#endif - -// <q> SLIP_ENABLED - slip - SLIP encoding and decoding - - -#ifndef SLIP_ENABLED -#define SLIP_ENABLED 1 -#endif - -// <e> TASK_MANAGER_ENABLED - task_manager - Task manager. -//========================================================== -#ifndef TASK_MANAGER_ENABLED -#define TASK_MANAGER_ENABLED 1 -#endif -// <q> TASK_MANAGER_CLI_CMDS - Enable CLI commands specific to the module - - -#ifndef TASK_MANAGER_CLI_CMDS -#define TASK_MANAGER_CLI_CMDS 1 -#endif - -// <o> TASK_MANAGER_CONFIG_MAX_TASKS - Maximum number of tasks which can be created -#ifndef TASK_MANAGER_CONFIG_MAX_TASKS -#define TASK_MANAGER_CONFIG_MAX_TASKS 2 -#endif - -// <o> TASK_MANAGER_CONFIG_STACK_SIZE - Stack size for every task (power of 2) -#ifndef TASK_MANAGER_CONFIG_STACK_SIZE -#define TASK_MANAGER_CONFIG_STACK_SIZE 1024 -#endif - -// <q> TASK_MANAGER_CONFIG_STACK_PROFILER_ENABLED - Enable stack profiling. - - -#ifndef TASK_MANAGER_CONFIG_STACK_PROFILER_ENABLED -#define TASK_MANAGER_CONFIG_STACK_PROFILER_ENABLED 1 -#endif - -// <o> TASK_MANAGER_CONFIG_STACK_GUARD - Configures stack guard. - -// <0=> Disabled -// <4=> 32 bytes -// <5=> 64 bytes -// <6=> 128 bytes -// <7=> 256 bytes -// <8=> 512 bytes - -#ifndef TASK_MANAGER_CONFIG_STACK_GUARD -#define TASK_MANAGER_CONFIG_STACK_GUARD 7 -#endif - -// </e> - -// <h> app_button - buttons handling module - -//========================================================== -// <q> BUTTON_ENABLED - Enables Button module - - -#ifndef BUTTON_ENABLED -#define BUTTON_ENABLED 1 -#endif - -// <q> BUTTON_HIGH_ACCURACY_ENABLED - Enables GPIOTE high accuracy for buttons - - -#ifndef BUTTON_HIGH_ACCURACY_ENABLED -#define BUTTON_HIGH_ACCURACY_ENABLED 0 -#endif - -// </h> -//========================================================== - -// <h> nrf_cli - Command line interface - -//========================================================== -// <q> NRF_CLI_ENABLED - Enable/disable the CLI module. - - -#ifndef NRF_CLI_ENABLED -#define NRF_CLI_ENABLED 1 -#endif - -// <o> NRF_CLI_ARGC_MAX - Maximum number of parameters passed to the command handler. -#ifndef NRF_CLI_ARGC_MAX -#define NRF_CLI_ARGC_MAX 12 -#endif - -// <q> NRF_CLI_BUILD_IN_CMDS_ENABLED - CLI built-in commands. - - -#ifndef NRF_CLI_BUILD_IN_CMDS_ENABLED -#define NRF_CLI_BUILD_IN_CMDS_ENABLED 1 -#endif - -// <o> NRF_CLI_CMD_BUFF_SIZE - Maximum buffer size for a single command. -#ifndef NRF_CLI_CMD_BUFF_SIZE -#define NRF_CLI_CMD_BUFF_SIZE 128 -#endif - -// <q> NRF_CLI_ECHO_STATUS - CLI echo status. If set, echo is ON. - - -#ifndef NRF_CLI_ECHO_STATUS -#define NRF_CLI_ECHO_STATUS 1 -#endif - -// <q> NRF_CLI_WILDCARD_ENABLED - Enable wildcard functionality for CLI commands. - - -#ifndef NRF_CLI_WILDCARD_ENABLED -#define NRF_CLI_WILDCARD_ENABLED 0 -#endif - -// <q> NRF_CLI_METAKEYS_ENABLED - Enable additional control keys for CLI commands like ctrl+a, ctrl+e, ctrl+w, ctrl+u - - -#ifndef NRF_CLI_METAKEYS_ENABLED -#define NRF_CLI_METAKEYS_ENABLED 0 -#endif - -// <o> NRF_CLI_PRINTF_BUFF_SIZE - Maximum print buffer size. -#ifndef NRF_CLI_PRINTF_BUFF_SIZE -#define NRF_CLI_PRINTF_BUFF_SIZE 23 -#endif - -// <e> NRF_CLI_HISTORY_ENABLED - Enable CLI history mode. -//========================================================== -#ifndef NRF_CLI_HISTORY_ENABLED -#define NRF_CLI_HISTORY_ENABLED 1 -#endif -// <o> NRF_CLI_HISTORY_ELEMENT_SIZE - Size of one memory object reserved for CLI history. -#ifndef NRF_CLI_HISTORY_ELEMENT_SIZE -#define NRF_CLI_HISTORY_ELEMENT_SIZE 32 -#endif - -// <o> NRF_CLI_HISTORY_ELEMENT_COUNT - Number of history memory objects. -#ifndef NRF_CLI_HISTORY_ELEMENT_COUNT -#define NRF_CLI_HISTORY_ELEMENT_COUNT 8 -#endif - -// </e> - -// <q> NRF_CLI_VT100_COLORS_ENABLED - CLI VT100 colors. - - -#ifndef NRF_CLI_VT100_COLORS_ENABLED -#define NRF_CLI_VT100_COLORS_ENABLED 1 -#endif - -// <q> NRF_CLI_STATISTICS_ENABLED - Enable CLI statistics. - - -#ifndef NRF_CLI_STATISTICS_ENABLED -#define NRF_CLI_STATISTICS_ENABLED 1 -#endif - -// <q> NRF_CLI_LOG_BACKEND - Enable logger backend interface. - - -#ifndef NRF_CLI_LOG_BACKEND -#define NRF_CLI_LOG_BACKEND 1 -#endif - -// <q> NRF_CLI_USES_TASK_MANAGER_ENABLED - Enable CLI to use task_manager - - -#ifndef NRF_CLI_USES_TASK_MANAGER_ENABLED -#define NRF_CLI_USES_TASK_MANAGER_ENABLED 0 -#endif - -// </h> -//========================================================== - -// <h> nrf_fprintf - fprintf function. - -//========================================================== -// <q> NRF_FPRINTF_ENABLED - Enable/disable fprintf module. - - -#ifndef NRF_FPRINTF_ENABLED -#define NRF_FPRINTF_ENABLED 1 -#endif - -// <q> NRF_FPRINTF_FLAG_AUTOMATIC_CR_ON_LF_ENABLED - For each printed LF, function will add CR. - - -#ifndef NRF_FPRINTF_FLAG_AUTOMATIC_CR_ON_LF_ENABLED -#define NRF_FPRINTF_FLAG_AUTOMATIC_CR_ON_LF_ENABLED 1 -#endif - -// </h> -//========================================================== - -// </h> -//========================================================== - -// <h> nRF_Log - -//========================================================== -// <e> NRF_LOG_ENABLED - nrf_log - Logger -//========================================================== -#ifndef NRF_LOG_ENABLED -#define NRF_LOG_ENABLED 1 -#endif -// <h> Log message pool - Configuration of log message pool - -//========================================================== -// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. -// <i> If a small value is set, then performance of logs processing -// <i> is degraded because data is fragmented. Bigger value impacts -// <i> RAM memory utilization. The size is set to fit a message with -// <i> a timestamp and up to 2 arguments in a single memory object. - -#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE -#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20 -#endif - -// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects -// <i> If a small value is set, then it may lead to a deadlock -// <i> in certain cases if backend has high latency and holds -// <i> multiple messages for long time. Bigger value impacts -// <i> RAM memory usage. - -#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT -#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8 -#endif - -// </h> -//========================================================== - -// <q> NRF_LOG_ALLOW_OVERFLOW - Configures behavior when circular buffer is full. - - -// <i> If set then oldest logs are overwritten. Otherwise a -// <i> marker is injected informing about overflow. - -#ifndef NRF_LOG_ALLOW_OVERFLOW -#define NRF_LOG_ALLOW_OVERFLOW 1 -#endif - -// <o> NRF_LOG_BUFSIZE - Size of the buffer for storing logs (in bytes). - - -// <i> Must be power of 2 and multiple of 4. -// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum. -// <128=> 128 -// <256=> 256 -// <512=> 512 -// <1024=> 1024 -// <2048=> 2048 -// <4096=> 4096 -// <8192=> 8192 -// <16384=> 16384 - -#ifndef NRF_LOG_BUFSIZE -#define NRF_LOG_BUFSIZE 1024 -#endif - -// <q> NRF_LOG_CLI_CMDS - Enable CLI commands for the module. - - -#ifndef NRF_LOG_CLI_CMDS -#define NRF_LOG_CLI_CMDS 1 -#endif - -// <o> NRF_LOG_DEFAULT_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_LOG_DEFAULT_LEVEL -#define NRF_LOG_DEFAULT_LEVEL 3 -#endif - -// <q> NRF_LOG_DEFERRED - Enable deffered logger. - - -// <i> Log data is buffered and can be processed in idle. - -#ifndef NRF_LOG_DEFERRED -#define NRF_LOG_DEFERRED 1 -#endif - -// <q> NRF_LOG_FILTERS_ENABLED - Enable dynamic filtering of logs. - - -#ifndef NRF_LOG_FILTERS_ENABLED -#define NRF_LOG_FILTERS_ENABLED 1 -#endif - -// <o> NRF_LOG_STR_PUSH_BUFFER_SIZE - Size of the buffer dedicated for strings stored using @ref NRF_LOG_PUSH. - -// <16=> 16 -// <32=> 32 -// <64=> 64 -// <128=> 128 -// <256=> 256 -// <512=> 512 -// <1024=> 1024 - -#ifndef NRF_LOG_STR_PUSH_BUFFER_SIZE -#define NRF_LOG_STR_PUSH_BUFFER_SIZE 128 -#endif - -// <o> NRF_LOG_STR_PUSH_BUFFER_SIZE - Size of the buffer dedicated for strings stored using @ref NRF_LOG_PUSH. - -// <16=> 16 -// <32=> 32 -// <64=> 64 -// <128=> 128 -// <256=> 256 -// <512=> 512 -// <1024=> 1024 - -#ifndef NRF_LOG_STR_PUSH_BUFFER_SIZE -#define NRF_LOG_STR_PUSH_BUFFER_SIZE 128 -#endif - -// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string -//========================================================== -#ifndef NRF_LOG_USES_COLORS -#define NRF_LOG_USES_COLORS 0 -#endif -// <o> NRF_LOG_COLOR_DEFAULT - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_LOG_COLOR_DEFAULT -#define NRF_LOG_COLOR_DEFAULT 0 -#endif - -// <o> NRF_LOG_ERROR_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_LOG_ERROR_COLOR -#define NRF_LOG_ERROR_COLOR 2 -#endif - -// <o> NRF_LOG_WARNING_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_LOG_WARNING_COLOR -#define NRF_LOG_WARNING_COLOR 4 -#endif - -// </e> - -// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping - -// <i> Function for getting the timestamp is provided by the user -//========================================================== -#ifndef NRF_LOG_USES_TIMESTAMP -#define NRF_LOG_USES_TIMESTAMP 0 -#endif -// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) or 0 to use app_timer frequency. -#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY -#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 0 -#endif - -// </e> - -// <h> nrf_log module configuration - -//========================================================== -// <h> nrf_log in nRF_Core - -//========================================================== -// <e> NRF_MPU_LIB_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef NRF_MPU_LIB_CONFIG_LOG_ENABLED -#define NRF_MPU_LIB_CONFIG_LOG_ENABLED 0 -#endif -// <o> NRF_MPU_LIB_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_MPU_LIB_CONFIG_LOG_LEVEL -#define NRF_MPU_LIB_CONFIG_LOG_LEVEL 3 -#endif - -// <o> NRF_MPU_LIB_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_MPU_LIB_CONFIG_INFO_COLOR -#define NRF_MPU_LIB_CONFIG_INFO_COLOR 0 -#endif - -// <o> NRF_MPU_LIB_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_MPU_LIB_CONFIG_DEBUG_COLOR -#define NRF_MPU_LIB_CONFIG_DEBUG_COLOR 0 -#endif - -// </e> - -// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED -#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0 -#endif -// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL -#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3 -#endif - -// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR -#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0 -#endif - -// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR -#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0 -#endif - -// </e> - -// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED -#define TASK_MANAGER_CONFIG_LOG_ENABLED 0 -#endif -// <o> TASK_MANAGER_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL -#define TASK_MANAGER_CONFIG_LOG_LEVEL 3 -#endif - -// <o> TASK_MANAGER_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef TASK_MANAGER_CONFIG_INFO_COLOR -#define TASK_MANAGER_CONFIG_INFO_COLOR 0 -#endif - -// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR -#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0 -#endif - -// </e> - -// </h> -//========================================================== - -// <h> nrf_log in nRF_Drivers - -//========================================================== -// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef CLOCK_CONFIG_LOG_ENABLED -#define CLOCK_CONFIG_LOG_ENABLED 0 -#endif -// <o> CLOCK_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef CLOCK_CONFIG_LOG_LEVEL -#define CLOCK_CONFIG_LOG_LEVEL 3 -#endif - -// <o> CLOCK_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef CLOCK_CONFIG_INFO_COLOR -#define CLOCK_CONFIG_INFO_COLOR 0 -#endif - -// <o> CLOCK_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef CLOCK_CONFIG_DEBUG_COLOR -#define CLOCK_CONFIG_DEBUG_COLOR 0 -#endif - -// </e> - -// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef COMP_CONFIG_LOG_ENABLED -#define COMP_CONFIG_LOG_ENABLED 0 -#endif -// <o> COMP_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef COMP_CONFIG_LOG_LEVEL -#define COMP_CONFIG_LOG_LEVEL 3 -#endif - -// <o> COMP_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef COMP_CONFIG_INFO_COLOR -#define COMP_CONFIG_INFO_COLOR 0 -#endif - -// <o> COMP_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef COMP_CONFIG_DEBUG_COLOR -#define COMP_CONFIG_DEBUG_COLOR 0 -#endif - -// </e> - -// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef GPIOTE_CONFIG_LOG_ENABLED -#define GPIOTE_CONFIG_LOG_ENABLED 0 -#endif -// <o> GPIOTE_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef GPIOTE_CONFIG_LOG_LEVEL -#define GPIOTE_CONFIG_LOG_LEVEL 3 -#endif - -// <o> GPIOTE_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef GPIOTE_CONFIG_INFO_COLOR -#define GPIOTE_CONFIG_INFO_COLOR 0 -#endif - -// <o> GPIOTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef GPIOTE_CONFIG_DEBUG_COLOR -#define GPIOTE_CONFIG_DEBUG_COLOR 0 -#endif - -// </e> - -// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef LPCOMP_CONFIG_LOG_ENABLED -#define LPCOMP_CONFIG_LOG_ENABLED 0 -#endif -// <o> LPCOMP_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef LPCOMP_CONFIG_LOG_LEVEL -#define LPCOMP_CONFIG_LOG_LEVEL 3 -#endif - -// <o> LPCOMP_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef LPCOMP_CONFIG_INFO_COLOR -#define LPCOMP_CONFIG_INFO_COLOR 0 -#endif - -// <o> LPCOMP_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef LPCOMP_CONFIG_DEBUG_COLOR -#define LPCOMP_CONFIG_DEBUG_COLOR 0 -#endif - -// </e> - -// <e> MAX3421E_HOST_CONFIG_LOG_ENABLED - Enable logging in the module -//========================================================== -#ifndef MAX3421E_HOST_CONFIG_LOG_ENABLED -#define MAX3421E_HOST_CONFIG_LOG_ENABLED 0 -#endif -// <o> MAX3421E_HOST_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef MAX3421E_HOST_CONFIG_LOG_LEVEL -#define MAX3421E_HOST_CONFIG_LOG_LEVEL 3 -#endif - -// <o> MAX3421E_HOST_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef MAX3421E_HOST_CONFIG_INFO_COLOR -#define MAX3421E_HOST_CONFIG_INFO_COLOR 0 -#endif - -// <o> MAX3421E_HOST_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef MAX3421E_HOST_CONFIG_DEBUG_COLOR -#define MAX3421E_HOST_CONFIG_DEBUG_COLOR 0 -#endif - -// </e> - -// <e> NRFX_USBD_CONFIG_LOG_ENABLED - Enable logging in the module -//========================================================== -#ifndef NRFX_USBD_CONFIG_LOG_ENABLED -#define NRFX_USBD_CONFIG_LOG_ENABLED 0 -#endif -// <o> NRFX_USBD_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRFX_USBD_CONFIG_LOG_LEVEL -#define NRFX_USBD_CONFIG_LOG_LEVEL 3 -#endif - -// <o> NRFX_USBD_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRFX_USBD_CONFIG_INFO_COLOR -#define NRFX_USBD_CONFIG_INFO_COLOR 0 -#endif - -// <o> NRFX_USBD_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRFX_USBD_CONFIG_DEBUG_COLOR -#define NRFX_USBD_CONFIG_DEBUG_COLOR 0 -#endif - -// </e> - -// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef PDM_CONFIG_LOG_ENABLED -#define PDM_CONFIG_LOG_ENABLED 0 -#endif -// <o> PDM_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef PDM_CONFIG_LOG_LEVEL -#define PDM_CONFIG_LOG_LEVEL 3 -#endif - -// <o> PDM_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef PDM_CONFIG_INFO_COLOR -#define PDM_CONFIG_INFO_COLOR 0 -#endif - -// <o> PDM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef PDM_CONFIG_DEBUG_COLOR -#define PDM_CONFIG_DEBUG_COLOR 0 -#endif - -// </e> - -// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef PPI_CONFIG_LOG_ENABLED -#define PPI_CONFIG_LOG_ENABLED 0 -#endif -// <o> PPI_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef PPI_CONFIG_LOG_LEVEL -#define PPI_CONFIG_LOG_LEVEL 3 -#endif - -// <o> PPI_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef PPI_CONFIG_INFO_COLOR -#define PPI_CONFIG_INFO_COLOR 0 -#endif - -// <o> PPI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef PPI_CONFIG_DEBUG_COLOR -#define PPI_CONFIG_DEBUG_COLOR 0 -#endif - -// </e> - -// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef PWM_CONFIG_LOG_ENABLED -#define PWM_CONFIG_LOG_ENABLED 0 -#endif -// <o> PWM_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef PWM_CONFIG_LOG_LEVEL -#define PWM_CONFIG_LOG_LEVEL 3 -#endif - -// <o> PWM_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef PWM_CONFIG_INFO_COLOR -#define PWM_CONFIG_INFO_COLOR 0 -#endif - -// <o> PWM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef PWM_CONFIG_DEBUG_COLOR -#define PWM_CONFIG_DEBUG_COLOR 0 -#endif - -// </e> - -// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef QDEC_CONFIG_LOG_ENABLED -#define QDEC_CONFIG_LOG_ENABLED 0 -#endif -// <o> QDEC_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef QDEC_CONFIG_LOG_LEVEL -#define QDEC_CONFIG_LOG_LEVEL 3 -#endif - -// <o> QDEC_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef QDEC_CONFIG_INFO_COLOR -#define QDEC_CONFIG_INFO_COLOR 0 -#endif - -// <o> QDEC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef QDEC_CONFIG_DEBUG_COLOR -#define QDEC_CONFIG_DEBUG_COLOR 0 -#endif - -// </e> - -// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef RNG_CONFIG_LOG_ENABLED -#define RNG_CONFIG_LOG_ENABLED 0 -#endif -// <o> RNG_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef RNG_CONFIG_LOG_LEVEL -#define RNG_CONFIG_LOG_LEVEL 3 -#endif - -// <o> RNG_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef RNG_CONFIG_INFO_COLOR -#define RNG_CONFIG_INFO_COLOR 0 -#endif - -// <o> RNG_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef RNG_CONFIG_DEBUG_COLOR -#define RNG_CONFIG_DEBUG_COLOR 0 -#endif - -// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED - Enables logging of random numbers. - - -#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED -#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0 -#endif - -// </e> - -// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef RTC_CONFIG_LOG_ENABLED -#define RTC_CONFIG_LOG_ENABLED 0 -#endif -// <o> RTC_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef RTC_CONFIG_LOG_LEVEL -#define RTC_CONFIG_LOG_LEVEL 3 -#endif - -// <o> RTC_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef RTC_CONFIG_INFO_COLOR -#define RTC_CONFIG_INFO_COLOR 0 -#endif - -// <o> RTC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef RTC_CONFIG_DEBUG_COLOR -#define RTC_CONFIG_DEBUG_COLOR 0 -#endif - -// </e> - -// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef SAADC_CONFIG_LOG_ENABLED -#define SAADC_CONFIG_LOG_ENABLED 0 -#endif -// <o> SAADC_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef SAADC_CONFIG_LOG_LEVEL -#define SAADC_CONFIG_LOG_LEVEL 3 -#endif - -// <o> SAADC_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef SAADC_CONFIG_INFO_COLOR -#define SAADC_CONFIG_INFO_COLOR 0 -#endif - -// <o> SAADC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef SAADC_CONFIG_DEBUG_COLOR -#define SAADC_CONFIG_DEBUG_COLOR 0 -#endif - -// </e> - -// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef SPIS_CONFIG_LOG_ENABLED -#define SPIS_CONFIG_LOG_ENABLED 0 -#endif -// <o> SPIS_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef SPIS_CONFIG_LOG_LEVEL -#define SPIS_CONFIG_LOG_LEVEL 3 -#endif - -// <o> SPIS_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef SPIS_CONFIG_INFO_COLOR -#define SPIS_CONFIG_INFO_COLOR 0 -#endif - -// <o> SPIS_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef SPIS_CONFIG_DEBUG_COLOR -#define SPIS_CONFIG_DEBUG_COLOR 0 -#endif - -// </e> - -// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef SPI_CONFIG_LOG_ENABLED -#define SPI_CONFIG_LOG_ENABLED 0 -#endif -// <o> SPI_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef SPI_CONFIG_LOG_LEVEL -#define SPI_CONFIG_LOG_LEVEL 3 -#endif - -// <o> SPI_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef SPI_CONFIG_INFO_COLOR -#define SPI_CONFIG_INFO_COLOR 0 -#endif - -// <o> SPI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef SPI_CONFIG_DEBUG_COLOR -#define SPI_CONFIG_DEBUG_COLOR 0 -#endif - -// </e> - -// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef TIMER_CONFIG_LOG_ENABLED -#define TIMER_CONFIG_LOG_ENABLED 0 -#endif -// <o> TIMER_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef TIMER_CONFIG_LOG_LEVEL -#define TIMER_CONFIG_LOG_LEVEL 3 -#endif - -// <o> TIMER_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef TIMER_CONFIG_INFO_COLOR -#define TIMER_CONFIG_INFO_COLOR 0 -#endif - -// <o> TIMER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef TIMER_CONFIG_DEBUG_COLOR -#define TIMER_CONFIG_DEBUG_COLOR 0 -#endif - -// </e> - -// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef TWIS_CONFIG_LOG_ENABLED -#define TWIS_CONFIG_LOG_ENABLED 0 -#endif -// <o> TWIS_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef TWIS_CONFIG_LOG_LEVEL -#define TWIS_CONFIG_LOG_LEVEL 3 -#endif - -// <o> TWIS_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef TWIS_CONFIG_INFO_COLOR -#define TWIS_CONFIG_INFO_COLOR 0 -#endif - -// <o> TWIS_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef TWIS_CONFIG_DEBUG_COLOR -#define TWIS_CONFIG_DEBUG_COLOR 0 -#endif - -// </e> - -// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef TWI_CONFIG_LOG_ENABLED -#define TWI_CONFIG_LOG_ENABLED 0 -#endif -// <o> TWI_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef TWI_CONFIG_LOG_LEVEL -#define TWI_CONFIG_LOG_LEVEL 3 -#endif - -// <o> TWI_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef TWI_CONFIG_INFO_COLOR -#define TWI_CONFIG_INFO_COLOR 0 -#endif - -// <o> TWI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef TWI_CONFIG_DEBUG_COLOR -#define TWI_CONFIG_DEBUG_COLOR 0 -#endif - -// </e> - -// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef UART_CONFIG_LOG_ENABLED -#define UART_CONFIG_LOG_ENABLED 0 -#endif -// <o> UART_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef UART_CONFIG_LOG_LEVEL -#define UART_CONFIG_LOG_LEVEL 3 -#endif - -// <o> UART_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef UART_CONFIG_INFO_COLOR -#define UART_CONFIG_INFO_COLOR 0 -#endif - -// <o> UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef UART_CONFIG_DEBUG_COLOR -#define UART_CONFIG_DEBUG_COLOR 0 -#endif - -// </e> - -// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module -//========================================================== -#ifndef USBD_CONFIG_LOG_ENABLED -#define USBD_CONFIG_LOG_ENABLED 0 -#endif -// <o> USBD_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef USBD_CONFIG_LOG_LEVEL -#define USBD_CONFIG_LOG_LEVEL 3 -#endif - -// <o> USBD_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef USBD_CONFIG_INFO_COLOR -#define USBD_CONFIG_INFO_COLOR 0 -#endif - -// <o> USBD_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef USBD_CONFIG_DEBUG_COLOR -#define USBD_CONFIG_DEBUG_COLOR 0 -#endif - -// </e> - -// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef WDT_CONFIG_LOG_ENABLED -#define WDT_CONFIG_LOG_ENABLED 0 -#endif -// <o> WDT_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef WDT_CONFIG_LOG_LEVEL -#define WDT_CONFIG_LOG_LEVEL 3 -#endif - -// <o> WDT_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef WDT_CONFIG_INFO_COLOR -#define WDT_CONFIG_INFO_COLOR 0 -#endif - -// <o> WDT_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef WDT_CONFIG_DEBUG_COLOR -#define WDT_CONFIG_DEBUG_COLOR 0 -#endif - -// </e> - -// </h> -//========================================================== - -// <h> nrf_log in nRF_Libraries - -//========================================================== -// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef APP_TIMER_CONFIG_LOG_ENABLED -#define APP_TIMER_CONFIG_LOG_ENABLED 0 -#endif -// <o> APP_TIMER_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef APP_TIMER_CONFIG_LOG_LEVEL -#define APP_TIMER_CONFIG_LOG_LEVEL 3 -#endif - -// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL - Initial severity level if dynamic filtering is enabled. - - -// <i> If module generates a lot of logs, initial log level can -// <i> be decreased to prevent flooding. Severity level can be -// <i> increased on instance basis. -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL -#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3 -#endif - -// <o> APP_TIMER_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef APP_TIMER_CONFIG_INFO_COLOR -#define APP_TIMER_CONFIG_INFO_COLOR 0 -#endif - -// <o> APP_TIMER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef APP_TIMER_CONFIG_DEBUG_COLOR -#define APP_TIMER_CONFIG_DEBUG_COLOR 0 -#endif - -// </e> - -// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED -#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0 -#endif -// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL -#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3 -#endif - -// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR -#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0 -#endif - -// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR -#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0 -#endif - -// </e> - -// <e> APP_USBD_CONFIG_LOG_ENABLED - Enable logging in the module. -//========================================================== -#ifndef APP_USBD_CONFIG_LOG_ENABLED -#define APP_USBD_CONFIG_LOG_ENABLED 0 -#endif -// <o> APP_USBD_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef APP_USBD_CONFIG_LOG_LEVEL -#define APP_USBD_CONFIG_LOG_LEVEL 3 -#endif - -// <o> APP_USBD_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef APP_USBD_CONFIG_INFO_COLOR -#define APP_USBD_CONFIG_INFO_COLOR 0 -#endif - -// <o> APP_USBD_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef APP_USBD_CONFIG_DEBUG_COLOR -#define APP_USBD_CONFIG_DEBUG_COLOR 0 -#endif - -// </e> - -// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED -#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0 -#endif -// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL -#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3 -#endif - -// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR -#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0 -#endif - -// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR -#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0 -#endif - -// </e> - -// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED -#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0 -#endif -// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL -#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3 -#endif - -// <o> APP_USBD_MSC_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR -#define APP_USBD_MSC_CONFIG_INFO_COLOR 0 -#endif - -// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR -#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0 -#endif - -// </e> - -// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED -#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0 -#endif -// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL -#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3 -#endif - -// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR -#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0 -#endif - -// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR -#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0 -#endif - -// </e> - -// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED -#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0 -#endif -// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL -#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3 -#endif - -// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL - Initial severity level if dynamic filtering is enabled - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL -#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3 -#endif - -// <o> NRF_ATFIFO_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR -#define NRF_ATFIFO_CONFIG_INFO_COLOR 0 -#endif - -// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR -#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0 -#endif - -// </e> - -// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED -#define NRF_BALLOC_CONFIG_LOG_ENABLED 0 -#endif -// <o> NRF_BALLOC_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL -#define NRF_BALLOC_CONFIG_LOG_LEVEL 3 -#endif - -// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL - Initial severity level if dynamic filtering is enabled. - - -// <i> If module generates a lot of logs, initial log level can -// <i> be decreased to prevent flooding. Severity level can be -// <i> increased on instance basis. -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL -#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3 -#endif - -// <o> NRF_BALLOC_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_BALLOC_CONFIG_INFO_COLOR -#define NRF_BALLOC_CONFIG_INFO_COLOR 0 -#endif - -// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR -#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0 -#endif - -// </e> - -// <e> NRF_BLOCK_DEV_EMPTY_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef NRF_BLOCK_DEV_EMPTY_CONFIG_LOG_ENABLED -#define NRF_BLOCK_DEV_EMPTY_CONFIG_LOG_ENABLED 0 -#endif -// <o> NRF_BLOCK_DEV_EMPTY_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_BLOCK_DEV_EMPTY_CONFIG_LOG_LEVEL -#define NRF_BLOCK_DEV_EMPTY_CONFIG_LOG_LEVEL 3 -#endif - -// <o> NRF_BLOCK_DEV_EMPTY_CONFIG_LOG_INIT_FILTER_LEVEL - Initial severity level if dynamic filtering is enabled - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_BLOCK_DEV_EMPTY_CONFIG_LOG_INIT_FILTER_LEVEL -#define NRF_BLOCK_DEV_EMPTY_CONFIG_LOG_INIT_FILTER_LEVEL 3 -#endif - -// <o> NRF_BLOCK_DEV_EMPTY_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_BLOCK_DEV_EMPTY_CONFIG_INFO_COLOR -#define NRF_BLOCK_DEV_EMPTY_CONFIG_INFO_COLOR 0 -#endif - -// <o> NRF_BLOCK_DEV_EMPTY_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_BLOCK_DEV_EMPTY_CONFIG_DEBUG_COLOR -#define NRF_BLOCK_DEV_EMPTY_CONFIG_DEBUG_COLOR 0 -#endif - -// </e> - -// <e> NRF_BLOCK_DEV_QSPI_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef NRF_BLOCK_DEV_QSPI_CONFIG_LOG_ENABLED -#define NRF_BLOCK_DEV_QSPI_CONFIG_LOG_ENABLED 0 -#endif -// <o> NRF_BLOCK_DEV_QSPI_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_BLOCK_DEV_QSPI_CONFIG_LOG_LEVEL -#define NRF_BLOCK_DEV_QSPI_CONFIG_LOG_LEVEL 3 -#endif - -// <o> NRF_BLOCK_DEV_QSPI_CONFIG_LOG_INIT_FILTER_LEVEL - Initial severity level if dynamic filtering is enabled - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_BLOCK_DEV_QSPI_CONFIG_LOG_INIT_FILTER_LEVEL -#define NRF_BLOCK_DEV_QSPI_CONFIG_LOG_INIT_FILTER_LEVEL 3 -#endif - -// <o> NRF_BLOCK_DEV_QSPI_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_BLOCK_DEV_QSPI_CONFIG_INFO_COLOR -#define NRF_BLOCK_DEV_QSPI_CONFIG_INFO_COLOR 0 -#endif - -// <o> NRF_BLOCK_DEV_QSPI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_BLOCK_DEV_QSPI_CONFIG_DEBUG_COLOR -#define NRF_BLOCK_DEV_QSPI_CONFIG_DEBUG_COLOR 0 -#endif - -// </e> - -// <e> NRF_BLOCK_DEV_RAM_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef NRF_BLOCK_DEV_RAM_CONFIG_LOG_ENABLED -#define NRF_BLOCK_DEV_RAM_CONFIG_LOG_ENABLED 0 -#endif -// <o> NRF_BLOCK_DEV_RAM_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_BLOCK_DEV_RAM_CONFIG_LOG_LEVEL -#define NRF_BLOCK_DEV_RAM_CONFIG_LOG_LEVEL 3 -#endif - -// <o> NRF_BLOCK_DEV_RAM_CONFIG_LOG_INIT_FILTER_LEVEL - Initial severity level if dynamic filtering is enabled - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_BLOCK_DEV_RAM_CONFIG_LOG_INIT_FILTER_LEVEL -#define NRF_BLOCK_DEV_RAM_CONFIG_LOG_INIT_FILTER_LEVEL 3 -#endif - -// <o> NRF_BLOCK_DEV_RAM_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_BLOCK_DEV_RAM_CONFIG_INFO_COLOR -#define NRF_BLOCK_DEV_RAM_CONFIG_INFO_COLOR 0 -#endif - -// <o> NRF_BLOCK_DEV_RAM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_BLOCK_DEV_RAM_CONFIG_DEBUG_COLOR -#define NRF_BLOCK_DEV_RAM_CONFIG_DEBUG_COLOR 0 -#endif - -// </e> - -// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED -#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0 -#endif -// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL -#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3 -#endif - -// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR -#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0 -#endif - -// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR -#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0 -#endif - -// </e> - -// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED -#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0 -#endif -// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL -#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3 -#endif - -// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR -#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0 -#endif - -// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR -#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0 -#endif - -// </e> - -// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED -#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0 -#endif -// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL -#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3 -#endif - -// <o> NRF_CLI_UART_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR -#define NRF_CLI_UART_CONFIG_INFO_COLOR 0 -#endif - -// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR -#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0 -#endif - -// </e> - -// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED -#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0 -#endif -// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL -#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3 -#endif - -// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR -#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0 -#endif - -// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR -#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0 -#endif - -// </e> - -// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED -#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0 -#endif -// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL -#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3 -#endif - -// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR -#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0 -#endif - -// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR -#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0 -#endif - -// </e> - -// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED -#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0 -#endif -// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL -#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3 -#endif - -// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR -#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0 -#endif - -// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR -#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0 -#endif - -// </e> - -// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED -#define NRF_QUEUE_CONFIG_LOG_ENABLED 0 -#endif -// <o> NRF_QUEUE_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL -#define NRF_QUEUE_CONFIG_LOG_LEVEL 3 -#endif - -// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL - Initial severity level if dynamic filtering is enabled - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL -#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3 -#endif - -// <o> NRF_QUEUE_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_QUEUE_CONFIG_INFO_COLOR -#define NRF_QUEUE_CONFIG_INFO_COLOR 0 -#endif - -// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR -#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0 -#endif - -// </e> - -// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module. -//========================================================== -#ifndef NRF_SDH_ANT_LOG_ENABLED -#define NRF_SDH_ANT_LOG_ENABLED 0 -#endif -// <o> NRF_SDH_ANT_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_SDH_ANT_LOG_LEVEL -#define NRF_SDH_ANT_LOG_LEVEL 3 -#endif - -// <o> NRF_SDH_ANT_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_SDH_ANT_INFO_COLOR -#define NRF_SDH_ANT_INFO_COLOR 0 -#endif - -// <o> NRF_SDH_ANT_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_SDH_ANT_DEBUG_COLOR -#define NRF_SDH_ANT_DEBUG_COLOR 0 -#endif - -// </e> - -// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module. -//========================================================== -#ifndef NRF_SDH_BLE_LOG_ENABLED -#define NRF_SDH_BLE_LOG_ENABLED 0 -#endif -// <o> NRF_SDH_BLE_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_SDH_BLE_LOG_LEVEL -#define NRF_SDH_BLE_LOG_LEVEL 3 -#endif - -// <o> NRF_SDH_BLE_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_SDH_BLE_INFO_COLOR -#define NRF_SDH_BLE_INFO_COLOR 0 -#endif - -// <o> NRF_SDH_BLE_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_SDH_BLE_DEBUG_COLOR -#define NRF_SDH_BLE_DEBUG_COLOR 0 -#endif - -// </e> - -// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module. -//========================================================== -#ifndef NRF_SDH_LOG_ENABLED -#define NRF_SDH_LOG_ENABLED 0 -#endif -// <o> NRF_SDH_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_SDH_LOG_LEVEL -#define NRF_SDH_LOG_LEVEL 3 -#endif - -// <o> NRF_SDH_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_SDH_INFO_COLOR -#define NRF_SDH_INFO_COLOR 0 -#endif - -// <o> NRF_SDH_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_SDH_DEBUG_COLOR -#define NRF_SDH_DEBUG_COLOR 0 -#endif - -// </e> - -// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module. -//========================================================== -#ifndef NRF_SDH_SOC_LOG_ENABLED -#define NRF_SDH_SOC_LOG_ENABLED 0 -#endif -// <o> NRF_SDH_SOC_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_SDH_SOC_LOG_LEVEL -#define NRF_SDH_SOC_LOG_LEVEL 3 -#endif - -// <o> NRF_SDH_SOC_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_SDH_SOC_INFO_COLOR -#define NRF_SDH_SOC_INFO_COLOR 0 -#endif - -// <o> NRF_SDH_SOC_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_SDH_SOC_DEBUG_COLOR -#define NRF_SDH_SOC_DEBUG_COLOR 0 -#endif - -// </e> - -// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED -#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0 -#endif -// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL -#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3 -#endif - -// <o> NRF_SORTLIST_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR -#define NRF_SORTLIST_CONFIG_INFO_COLOR 0 -#endif - -// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR -#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0 -#endif - -// </e> - -// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED -#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0 -#endif -// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL -#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3 -#endif - -// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR -#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0 -#endif - -// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR -#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0 -#endif - -// </e> - -// <e> PM_LOG_ENABLED - Enable logging in Peer Manager and its submodules. -//========================================================== -#ifndef PM_LOG_ENABLED -#define PM_LOG_ENABLED 1 -#endif -// <o> PM_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef PM_LOG_LEVEL -#define PM_LOG_LEVEL 3 -#endif - -// <o> PM_LOG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef PM_LOG_INFO_COLOR -#define PM_LOG_INFO_COLOR 0 -#endif - -// <o> PM_LOG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef PM_LOG_DEBUG_COLOR -#define PM_LOG_DEBUG_COLOR 0 -#endif - -// </e> - -// </h> -//========================================================== - -// <h> nrf_log in nRF_Serialization - -//========================================================== -// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED -#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0 -#endif -// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL -#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3 -#endif - -// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR -#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0 -#endif - -// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR -#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0 -#endif - -// </e> - -// </h> -//========================================================== - -// </h> -//========================================================== - -// </e> - -// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED - nrf_log_str_formatter - Log string formatter - - -#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED -#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1 -#endif - //========================================================== // <q> BSP_BTN_BLE_ENABLED - bsp_btn_ble - Button Control for BLE @@ -8349,13 +3524,13 @@ // <e> NRFX_SPI_ENABLED - nrfx_spi - SPI peripheral driver //========================================================== #ifndef NRFX_SPI_ENABLED -#define NRFX_SPI_ENABLED 1 +#define NRFX_SPI_ENABLED 0 #endif // <q> NRFX_SPI0_ENABLED - Enable SPI0 instance #ifndef NRFX_SPI0_ENABLED -#define NRFX_SPI0_ENABLED 1 +#define NRFX_SPI0_ENABLED 0 #endif // <q> NRFX_SPI1_ENABLED - Enable SPI1 instance @@ -9930,7 +5105,7 @@ // <e> RNG_ENABLED - nrf_drv_rng - RNG peripheral driver - legacy layer //========================================================== #ifndef RNG_ENABLED -#define RNG_ENABLED 1 +#define RNG_ENABLED 0 #endif // <q> RNG_CONFIG_ERROR_CORRECTION - Error correction @@ -10181,7 +5356,7 @@ // <e> SPI_ENABLED - nrf_drv_spi - SPI/SPIM peripheral driver - legacy layer //========================================================== #ifndef SPI_ENABLED -#define SPI_ENABLED 1 +#define SPI_ENABLED 0 #endif // <o> SPI_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority @@ -10213,7 +5388,7 @@ // <e> SPI0_ENABLED - Enable SPI0 instance //========================================================== #ifndef SPI0_ENABLED -#define SPI0_ENABLED 1 +#define SPI0_ENABLED 0 #endif // <q> SPI0_USE_EASY_DMA - Use EasyDMA